1Richtek RT1711H TypeC PD Controller. 2 3Required properties: 4 - compatible : Must be "richtek,rt1711h". 5 - reg : Must be 0x4e, it's slave address of RT1711H. 6 - interrupts : <a b> where a is the interrupt number and b represents an 7 encoding of the sense and level information for the interrupt. 8 9Required sub-node: 10- connector: The "usb-c-connector" attached to the tcpci chip, the bindings 11 of connector node are specified in 12 Documentation/devicetree/bindings/connector/usb-connector.yaml 13 14Example : 15rt1711h@4e { 16 compatible = "richtek,rt1711h"; 17 reg = <0x4e>; 18 interrupt-parent = <&gpio26>; 19 interrupts = <0 IRQ_TYPE_LEVEL_LOW>; 20 21 usb_con: connector { 22 compatible = "usb-c-connector"; 23 label = "USB-C"; 24 data-role = "dual"; 25 power-role = "dual"; 26 try-power-role = "sink"; 27 source-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM)>; 28 sink-pdos = <PDO_FIXED(5000, 2000, PDO_FIXED_USB_COMM) 29 PDO_VAR(5000, 12000, 2000)>; 30 op-sink-microwatt = <10000000>; 31 32 ports { 33 #address-cells = <1>; 34 #size-cells = <0>; 35 36 port@1 { 37 reg = <1>; 38 usb_con_ss: endpoint { 39 remote-endpoint = <&usb3_data_ss>; 40 }; 41 }; 42 }; 43 }; 44}; 45