xref: /linux/Documentation/devicetree/bindings/usb/dwc3-xilinx.yaml (revision 986c6f7c3fc855032f3457a5a1b7fbcc09c375bb) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/usb/dwc3-xilinx.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Xilinx SuperSpeed DWC3 USB SoC controller
8
9maintainers:
10  - Manish Narani <manish.narani@xilinx.com>
11
12properties:
13  compatible:
14    items:
15      - enum:
16          - xlnx,zynqmp-dwc3
17          - xlnx,versal-dwc3
18  reg:
19    maxItems: 1
20
21  "#address-cells":
22    enum: [ 1, 2 ]
23
24  "#size-cells":
25    enum: [ 1, 2 ]
26
27  ranges: true
28
29  power-domains:
30    description: specifies a phandle to PM domain provider node
31    maxItems: 1
32
33  clocks:
34    description:
35      A list of phandle and clock-specifier pairs for the clocks
36      listed in clock-names.
37    items:
38      - description: Master/Core clock, has to be >= 125 MHz
39          for SS operation and >= 60MHz for HS operation.
40      - description: Clock source to core during PHY power down.
41
42  clock-names:
43    items:
44      - const: bus_clk
45      - const: ref_clk
46
47  resets:
48    description:
49      A list of phandles for resets listed in reset-names.
50
51    items:
52      - description: USB core reset
53      - description: USB hibernation reset
54      - description: USB APB reset
55
56  reset-names:
57    items:
58      - const: usb_crst
59      - const: usb_hibrst
60      - const: usb_apbrst
61
62  phys:
63    minItems: 1
64    maxItems: 2
65
66  phy-names:
67    minItems: 1
68    maxItems: 2
69    items:
70      enum:
71        - usb2-phy
72        - usb3-phy
73
74# Required child node:
75
76patternProperties:
77  "^usb@[0-9a-f]+$":
78    $ref: snps,dwc3.yaml#
79
80required:
81  - compatible
82  - reg
83  - "#address-cells"
84  - "#size-cells"
85  - ranges
86  - power-domains
87  - clocks
88  - clock-names
89  - resets
90  - reset-names
91
92additionalProperties: false
93
94examples:
95  - |
96    #include <dt-bindings/dma/xlnx-zynqmp-dpdma.h>
97    #include <dt-bindings/power/xlnx-zynqmp-power.h>
98    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
99    #include <dt-bindings/clock/xlnx-zynqmp-clk.h>
100    #include <dt-bindings/reset/xlnx-zynqmp-resets.h>
101    #include <dt-bindings/phy/phy.h>
102    axi {
103        #address-cells = <2>;
104        #size-cells = <2>;
105
106        usb@0 {
107            #address-cells = <0x2>;
108            #size-cells = <0x2>;
109            compatible = "xlnx,zynqmp-dwc3";
110            reg = <0x0 0xff9d0000 0x0 0x100>;
111            clocks = <&zynqmp_clk USB0_BUS_REF>, <&zynqmp_clk USB3_DUAL_REF>;
112            clock-names = "bus_clk", "ref_clk";
113            power-domains = <&zynqmp_firmware PD_USB_0>;
114            resets = <&zynqmp_reset ZYNQMP_RESET_USB1_CORERESET>,
115                     <&zynqmp_reset ZYNQMP_RESET_USB1_HIBERRESET>,
116                     <&zynqmp_reset ZYNQMP_RESET_USB1_APB>;
117            reset-names = "usb_crst", "usb_hibrst", "usb_apbrst";
118            phys = <&psgtr 2 PHY_TYPE_USB3 0 2>;
119            phy-names = "usb3-phy";
120            ranges;
121
122            usb@fe200000 {
123                compatible = "snps,dwc3";
124                reg = <0x0 0xfe200000 0x0 0x40000>;
125                interrupt-names = "host", "otg";
126                interrupts = <0 65 4>, <0 69 4>;
127                dr_mode = "host";
128                dma-coherent;
129            };
130        };
131    };
132