xref: /linux/Documentation/devicetree/bindings/usb/amlogic,meson-g12a-usb-ctrl.yaml (revision 8dcb5a119b9c04467697b1d2f40b7c85912af8b3)

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
# Copyright 2019 BayLibre, SAS
%YAML 1.2
---
$id: "http://devicetree.org/schemas/usb/amlogic,meson-g12a-usb-ctrl.yaml#"
$schema: "http://devicetree.org/meta-schemas/core.yaml#"

title: Amlogic Meson G12A DWC3 USB SoC Controller Glue

maintainers:
  - Neil Armstrong <narmstrong@baylibre.com>

description: |
  The Amlogic G12A embeds a DWC3 USB IP Core configured for USB2 and USB3
  in host-only mode, and a DWC2 IP Core configured for USB2 peripheral mode
  only.

  A glue connects the DWC3 core to USB2 PHYs and optionally to an USB3 PHY.

  One of the USB2 PHYs can be re-routed in peripheral mode to a DWC2 USB IP.

  The DWC3 Glue controls the PHY routing and power, an interrupt line is
  connected to the Glue to serve as OTG ID change detection.

  The Amlogic A1 embeds a DWC3 USB IP Core configured for USB2 in
  host-only mode.

properties:
  compatible:
    enum:
      - amlogic,meson-g12a-usb-ctrl
      - amlogic,meson-a1-usb-ctrl

  ranges: true

  "#address-cells":
    enum: [ 1, 2 ]

  "#size-cells":
    enum: [ 1, 2 ]

  clocks:
    minItems: 1

  resets:
    minItems: 1

  reg:
    maxItems: 1

  interrupts:
    maxItems: 1

  phy-names:
    items:
      - const: usb2-phy0 # USB2 PHY0 if USBHOST_A port is used
      - const: usb2-phy1 # USB2 PHY1 if USBOTG_B port is used
      - const: usb3-phy0 # USB3 PHY if USB3_0 is used

  phys:
    minItems: 1
    maxItems: 3

  dr_mode: true

  power-domains:
    maxItems: 1

  vbus-supply:
    description: VBUS power supply when used in OTG switchable mode

patternProperties:
  "^usb@[0-9a-f]+$":
    type: object

additionalProperties: false

required:
  - compatible
  - "#address-cells"
  - "#size-cells"
  - ranges
  - clocks
  - resets
  - reg
  - interrupts
  - phy-names
  - phys
  - dr_mode

allOf:
  - if:
      properties:
        compatible:
          enum:
            - amlogic,meson-a1-usb-ctrl

    then:
      properties:
        clocks:
          minItems: 3
        clock-names:
          items:
            - const: usb_ctrl
            - const: usb_bus
            - const: xtal_usb_ctrl
      required:
        - clock-names

examples:
  - |
    usb: usb@ffe09000 {
          compatible = "amlogic,meson-g12a-usb-ctrl";
          reg = <0x0 0xffe09000 0x0 0xa0>;
          interrupts = <16>;
          #address-cells = <1>;
          #size-cells = <1>;
          ranges;

          clocks = <&clkc_usb>;
          resets = <&reset_usb>;

          dr_mode = "otg";

          phys = <&usb2_phy0>, <&usb2_phy1>, <&usb3_phy0>;
          phy-names = "usb2-phy0", "usb2-phy1", "usb3-phy0";

          dwc2: usb@ff400000 {
              compatible = "amlogic,meson-g12a-usb", "snps,dwc2";
              reg = <0xff400000 0x40000>;
              interrupts = <31>;
              clocks = <&clkc_usb1>;
              clock-names = "otg";
              phys = <&usb2_phy1>;
              dr_mode = "peripheral";
              g-rx-fifo-size = <192>;
              g-np-tx-fifo-size = <128>;
              g-tx-fifo-size = <128 128 16 16 16>;
          };

          dwc3: usb@ff500000 {
              compatible = "snps,dwc3";
              reg = <0xff500000 0x100000>;
              interrupts = <30>;
              dr_mode = "host";
              snps,dis_u2_susphy_quirk;
              snps,quirk-frame-length-adjustment;
          };
    };