1AM33XX MUSB GLUE 2 - compatible : Should be "ti,musb-am33xx" 3 - ti,hwmods : must be "usb_otg_hs" 4 - multipoint : Should be "1" indicating the musb controller supports 5 multipoint. This is a MUSB configuration-specific setting. 6 - num_eps : Specifies the number of endpoints. This is also a 7 MUSB configuration-specific setting. Should be set to "16" 8 - ram_bits : Specifies the ram address size. Should be set to "12" 9 - port0_mode : Should be "3" to represent OTG. "1" signifies HOST and "2" 10 represents PERIPHERAL. 11 - port1_mode : Should be "1" to represent HOST. "3" signifies OTG and "2" 12 represents PERIPHERAL. 13 - power : Should be "250". This signifies the controller can supply upto 14 500mA when operating in host mode. 15