xref: /linux/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml (revision e7d759f31ca295d589f7420719c311870bb3166f)
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung Exynos SoC Multi Core Timer (MCT)
8
9maintainers:
10  - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |+
13  The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
14  global timer and CPU local timers. The global timer is a 64-bit free running
15  up-counter and can generate 4 interrupts when the counter reaches one of the
16  four preset counter values. The CPU local timers are 32-bit free running
17  down-counters and generate an interrupt when the counter expires. There is
18  one CPU local timer instantiated in MCT for every CPU in the system.
19
20properties:
21  compatible:
22    oneOf:
23      - enum:
24          - samsung,exynos4210-mct
25          - samsung,exynos4412-mct
26      - items:
27          - enum:
28              - axis,artpec8-mct
29              - samsung,exynos3250-mct
30              - samsung,exynos5250-mct
31              - samsung,exynos5260-mct
32              - samsung,exynos5420-mct
33              - samsung,exynos5433-mct
34              - samsung,exynos850-mct
35              - tesla,fsd-mct
36          - const: samsung,exynos4210-mct
37
38  clocks:
39    maxItems: 2
40
41  clock-names:
42    items:
43      - const: fin_pll
44      - const: mct
45
46  reg:
47    maxItems: 1
48
49  samsung,frc-shared:
50    type: boolean
51    description: |
52      Indicates that the hardware requires that this processor share the
53      free-running counter with a different (main) processor.
54
55  samsung,local-timers:
56    $ref: /schemas/types.yaml#/definitions/uint32-array
57    minItems: 1
58    maxItems: 16
59    description: |
60      List of indices of local timers usable from this processor.
61
62  interrupts:
63    description: |
64      Interrupts should be put in specific order. This is, the local timer
65      interrupts should be specified after the four global timer interrupts
66      have been specified:
67      0: Global Timer Interrupt 0
68      1: Global Timer Interrupt 1
69      2: Global Timer Interrupt 2
70      3: Global Timer Interrupt 3
71      4: Local Timer Interrupt 0
72      5: Local Timer Interrupt 1
73      6: ..
74      7: ..
75      i: Local Timer Interrupt n
76      For MCT block that uses a per-processor interrupt for local timers, such
77      as ones compatible with "samsung,exynos4412-mct", only one local timer
78      interrupt might be specified, meaning that all local timers use the same
79      per processor interrupt.
80    minItems: 5               # 4 Global + 1 local
81    maxItems: 20              # 4 Global + 16 local
82
83required:
84  - compatible
85  - clock-names
86  - clocks
87  - interrupts
88  - reg
89
90allOf:
91  - if:
92      not:
93        properties:
94          compatible:
95            contains:
96              enum:
97                - axis,artpec8-mct
98    then:
99      properties:
100        samsung,local-timers: false
101        samsung,frc-shared: false
102  - if:
103      properties:
104        compatible:
105          contains:
106            const: samsung,exynos3250-mct
107    then:
108      properties:
109        interrupts:
110          minItems: 8
111          maxItems: 8
112
113  - if:
114      properties:
115        compatible:
116          contains:
117            const: samsung,exynos5250-mct
118    then:
119      properties:
120        interrupts:
121          minItems: 6
122          maxItems: 6
123
124  - if:
125      properties:
126        compatible:
127          contains:
128            enum:
129              - axis,artpec8-mct
130              - samsung,exynos5260-mct
131              - samsung,exynos5420-mct
132              - samsung,exynos5433-mct
133              - samsung,exynos850-mct
134    then:
135      properties:
136        interrupts:
137          minItems: 12
138          maxItems: 12
139
140  - if:
141      properties:
142        compatible:
143          contains:
144            enum:
145              - tesla,fsd-mct
146    then:
147      properties:
148        interrupts:
149          minItems: 16
150          maxItems: 16
151
152additionalProperties: false
153
154examples:
155  - |
156    // In this example, the IP contains two local timers, using separate
157    // interrupts, so two local timer interrupts have been specified,
158    // in addition to four global timer interrupts.
159    #include <dt-bindings/clock/exynos4.h>
160    #include <dt-bindings/interrupt-controller/arm-gic.h>
161
162    timer@10050000 {
163        compatible = "samsung,exynos4210-mct";
164        reg = <0x10050000 0x800>;
165        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
166        clock-names = "fin_pll", "mct";
167
168        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
169                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
170                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
171                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
172                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
173                     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
174    };
175
176  - |
177    // In this example, the timer interrupts are connected to two separate
178    // interrupt controllers. Hence, an interrupts-extended is needed.
179    #include <dt-bindings/clock/exynos4.h>
180    #include <dt-bindings/interrupt-controller/arm-gic.h>
181
182    timer@101c0000 {
183        compatible = "samsung,exynos4210-mct";
184        reg = <0x101C0000 0x800>;
185        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
186        clock-names = "fin_pll", "mct";
187
188        interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
189                              <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
190                              <&combiner 12 6>,
191                              <&combiner 12 7>,
192                              <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
193                              <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
194    };
195
196  - |
197    // In this example, the IP contains four local timers, but using
198    // a per-processor interrupt to handle them. Only one first local
199    // interrupt is specified.
200    #include <dt-bindings/clock/exynos4.h>
201    #include <dt-bindings/interrupt-controller/arm-gic.h>
202
203    timer@10050000 {
204        compatible = "samsung,exynos4412-mct";
205        reg = <0x10050000 0x800>;
206        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
207        clock-names = "fin_pll", "mct";
208
209        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
210                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
211                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
212                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
213                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>;
214    };
215
216  - |
217    // In this example, the IP contains four local timers, but using
218    // a per-processor interrupt to handle them. All the local timer
219    // interrupts are specified.
220    #include <dt-bindings/clock/exynos4.h>
221    #include <dt-bindings/interrupt-controller/arm-gic.h>
222
223    timer@10050000 {
224        compatible = "samsung,exynos4412-mct";
225        reg = <0x10050000 0x800>;
226        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
227        clock-names = "fin_pll", "mct";
228
229        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
230                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
231                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
232                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
233                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
234                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
235                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
236                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>;
237    };
238