xref: /linux/Documentation/devicetree/bindings/timer/samsung,exynos4210-mct.yaml (revision ce038aeaee68f2e41c732b4b91c7185a1cac14b5) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/timer/samsung,exynos4210-mct.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Samsung Exynos SoC Multi Core Timer (MCT)
8
9maintainers:
10  - Krzysztof Kozlowski <krzk@kernel.org>
11
12description: |+
13  The Samsung's Multi Core Timer (MCT) module includes two main blocks, the
14  global timer and CPU local timers. The global timer is a 64-bit free running
15  up-counter and can generate 4 interrupts when the counter reaches one of the
16  four preset counter values. The CPU local timers are 32-bit free running
17  down-counters and generate an interrupt when the counter expires. There is
18  one CPU local timer instantiated in MCT for every CPU in the system.
19
20properties:
21  compatible:
22    enum:
23      - samsung,exynos4210-mct
24      - samsung,exynos4412-mct
25
26  clocks:
27    minItems: 2
28    maxItems: 2
29
30  clock-names:
31    items:
32      - pattern: "^(fin_pll|mct)$"
33      - pattern: "^(fin_pll|mct)$"
34
35  reg:
36    maxItems: 1
37
38  interrupts:
39    description: |
40      Interrupts should be put in specific order. This is, the local timer
41      interrupts should be specified after the four global timer interrupts
42      have been specified:
43      0: Global Timer Interrupt 0
44      1: Global Timer Interrupt 1
45      2: Global Timer Interrupt 2
46      3: Global Timer Interrupt 3
47      4: Local Timer Interrupt 0
48      5: Local Timer Interrupt 1
49      6: ..
50      7: ..
51      i: Local Timer Interrupt n
52      For MCT block that uses a per-processor interrupt for local timers, such
53      as ones compatible with "samsung,exynos4412-mct", only one local timer
54      interrupt might be specified, meaning that all local timers use the same
55      per processor interrupt.
56    minItems: 5               # 4 Global + 1 local
57    maxItems: 20              # 4 Global + 16 local
58
59required:
60  - compatible
61  - clock-names
62  - clocks
63  - interrupts
64  - reg
65
66additionalProperties: false
67
68examples:
69  - |
70    // In this example, the IP contains two local timers, using separate
71    // interrupts, so two local timer interrupts have been specified,
72    // in addition to four global timer interrupts.
73    #include <dt-bindings/clock/exynos4.h>
74    #include <dt-bindings/interrupt-controller/arm-gic.h>
75
76    timer@10050000 {
77        compatible = "samsung,exynos4210-mct";
78        reg = <0x10050000 0x800>;
79        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
80        clock-names = "fin_pll", "mct";
81
82        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
83                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
84                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
85                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
86                     <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
87                     <GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
88    };
89
90  - |
91    // In this example, the timer interrupts are connected to two separate
92    // interrupt controllers. Hence, an interrupts-extended is needed.
93    #include <dt-bindings/clock/exynos4.h>
94    #include <dt-bindings/interrupt-controller/arm-gic.h>
95
96    timer@101c0000 {
97        compatible = "samsung,exynos4210-mct";
98        reg = <0x101C0000 0x800>;
99        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
100        clock-names = "fin_pll", "mct";
101
102        interrupts-extended = <&gic GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
103                              <&gic GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
104                              <&combiner 12 6>,
105                              <&combiner 12 7>,
106                              <&gic GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>,
107                              <&gic GIC_SPI 48 IRQ_TYPE_LEVEL_HIGH>;
108    };
109
110  - |
111    // In this example, the IP contains four local timers, but using
112    // a per-processor interrupt to handle them. Only one first local
113    // interrupt is specified.
114    #include <dt-bindings/clock/exynos4.h>
115    #include <dt-bindings/interrupt-controller/arm-gic.h>
116
117    timer@10050000 {
118        compatible = "samsung,exynos4412-mct";
119        reg = <0x10050000 0x800>;
120        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
121        clock-names = "fin_pll", "mct";
122
123        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
124                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
125                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
126                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
127                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>;
128    };
129
130  - |
131    // In this example, the IP contains four local timers, but using
132    // a per-processor interrupt to handle them. All the local timer
133    // interrupts are specified.
134    #include <dt-bindings/clock/exynos4.h>
135    #include <dt-bindings/interrupt-controller/arm-gic.h>
136
137    timer@10050000 {
138        compatible = "samsung,exynos4412-mct";
139        reg = <0x10050000 0x800>;
140        clocks = <&clock CLK_FIN_PLL>, <&clock CLK_MCT>;
141        clock-names = "fin_pll", "mct";
142
143        interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>,
144                     <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>,
145                     <GIC_SPI 70 IRQ_TYPE_LEVEL_HIGH>,
146                     <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
147                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
148                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
149                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>,
150                     <GIC_PPI 42 IRQ_TYPE_LEVEL_HIGH>;
151    };
152