xref: /linux/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/spi-fsl-lpspi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale Low Power SPI (LPSPI) for i.MX
8
9maintainers:
10  - Shawn Guo <shawnguo@kernel.org>
11  - Sascha Hauer <s.hauer@pengutronix.de>
12  - Fabio Estevam <festevam@gmail.com>
13
14allOf:
15  - $ref: /schemas/spi/spi-controller.yaml#
16
17properties:
18  compatible:
19    oneOf:
20      - enum:
21          - fsl,imx7ulp-spi
22          - fsl,imx8qxp-spi
23      - items:
24          - enum:
25              - fsl,imx8ulp-spi
26              - fsl,imx93-spi
27              - fsl,imx95-spi
28          - const: fsl,imx7ulp-spi
29  reg:
30    maxItems: 1
31
32  interrupts:
33    maxItems: 1
34
35  clocks:
36    items:
37      - description: SoC SPI per clock
38      - description: SoC SPI ipg clock
39
40  clock-names:
41    items:
42      - const: per
43      - const: ipg
44
45  dmas:
46    items:
47      - description: TX DMA Channel
48      - description: RX DMA Channel
49
50  dma-names:
51    items:
52      - const: tx
53      - const: rx
54
55  fsl,spi-only-use-cs1-sel:
56    description:
57      spi common code does not support use of CS signals discontinuously.
58      i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add
59      this property to re-config the chipselect value in the LPSPI driver.
60    type: boolean
61
62  num-cs:
63    description:
64      number of chip selects.
65    minimum: 1
66    maximum: 2
67    default: 1
68
69  power-domains:
70    maxItems: 1
71
72required:
73  - compatible
74  - reg
75  - interrupts
76  - clocks
77  - clock-names
78
79unevaluatedProperties: false
80
81examples:
82  - |
83    #include <dt-bindings/clock/imx7ulp-clock.h>
84    #include <dt-bindings/interrupt-controller/arm-gic.h>
85
86    spi@40290000 {
87        compatible = "fsl,imx7ulp-spi";
88        reg = <0x40290000 0x10000>;
89        interrupt-parent = <&intc>;
90        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
91        clocks = <&clks IMX7ULP_CLK_LPSPI2>,
92                 <&clks IMX7ULP_CLK_DUMMY>;
93        clock-names = "per", "ipg";
94        spi-slave;
95        fsl,spi-only-use-cs1-sel;
96        num-cs = <2>;
97    };
98