xref: /linux/Documentation/devicetree/bindings/spi/spi-fsl-lpspi.yaml (revision 49aa77165c00e5047b17b0072bbb41cc83a9f197) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/spi-fsl-lpspi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale Low Power SPI (LPSPI) for i.MX
8
9maintainers:
10  - Anson Huang <Anson.Huang@nxp.com>
11
12allOf:
13  - $ref: /schemas/spi/spi-controller.yaml#
14
15properties:
16  compatible:
17    oneOf:
18      - enum:
19          - fsl,imx7ulp-spi
20          - fsl,imx8qxp-spi
21      - items:
22          - enum:
23              - fsl,imx8ulp-spi
24              - fsl,imx93-spi
25          - const: fsl,imx7ulp-spi
26  reg:
27    maxItems: 1
28
29  interrupts:
30    maxItems: 1
31
32  clocks:
33    items:
34      - description: SoC SPI per clock
35      - description: SoC SPI ipg clock
36
37  clock-names:
38    items:
39      - const: per
40      - const: ipg
41
42  dmas:
43    items:
44      - description: TX DMA Channel
45      - description: RX DMA Channel
46
47  dma-names:
48    items:
49      - const: tx
50      - const: rx
51
52  fsl,spi-only-use-cs1-sel:
53    description:
54      spi common code does not support use of CS signals discontinuously.
55      i.MX8DXL-EVK board only uses CS1 without using CS0. Therefore, add
56      this property to re-config the chipselect value in the LPSPI driver.
57    type: boolean
58
59  num-cs:
60    description:
61      number of chip selects.
62    minimum: 1
63    maximum: 2
64    default: 1
65
66  power-domains:
67    maxItems: 1
68
69required:
70  - compatible
71  - reg
72  - interrupts
73  - clocks
74  - clock-names
75
76unevaluatedProperties: false
77
78examples:
79  - |
80    #include <dt-bindings/clock/imx7ulp-clock.h>
81    #include <dt-bindings/interrupt-controller/arm-gic.h>
82
83    spi@40290000 {
84        compatible = "fsl,imx7ulp-spi";
85        reg = <0x40290000 0x10000>;
86        interrupt-parent = <&intc>;
87        interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
88        clocks = <&clks IMX7ULP_CLK_LPSPI2>,
89                 <&clks IMX7ULP_CLK_DUMMY>;
90        clock-names = "per", "ipg";
91        spi-slave;
92        fsl,spi-only-use-cs1-sel;
93        num-cs = <2>;
94    };
95