xref: /linux/Documentation/devicetree/bindings/spi/omap-spi.yaml (revision 1644d755d0b06d0f1ee93e1c44336c29386546b4) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/omap-spi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: SPI Controller on OMAP and K3 SoCs
8
9maintainers:
10  - Aswath Govindraju <a-govindraju@ti.com>
11
12allOf:
13  - $ref: spi-controller.yaml#
14
15properties:
16  compatible:
17    oneOf:
18      - items:
19          - enum:
20              - ti,am654-mcspi
21              - ti,am4372-mcspi
22          - const: ti,omap4-mcspi
23      - items:
24          - enum:
25              - ti,omap2-mcspi
26              - ti,omap4-mcspi
27
28  reg:
29    maxItems: 1
30
31  interrupts:
32    maxItems: 1
33
34  clocks:
35    maxItems: 1
36
37  power-domains:
38    maxItems: 1
39
40  ti,spi-num-cs:
41    $ref: /schemas/types.yaml#/definitions/uint32
42    description: Number of chipselect supported  by the instance.
43    minimum: 1
44    maximum: 4
45
46  ti,hwmods:
47    $ref: /schemas/types.yaml#/definitions/string
48    description:
49      Must be "mcspi<n>", n being the instance number (1-based).
50      This property is applicable only on legacy platforms mainly omap2/3
51      and ti81xx and should not be used on other platforms.
52    deprecated: true
53
54  ti,pindir-d0-out-d1-in:
55    description:
56      Select the D0 pin as output and D1 as input. The default is D0
57      as input and D1 as output.
58    type: boolean
59
60  dmas:
61    description:
62      List of DMA specifiers with the controller specific format as
63      described in the generic DMA client binding. A tx and rx
64      specifier is required for each chip select.
65    minItems: 1
66    maxItems: 8
67
68  dma-names:
69    description:
70      List of DMA request names. These strings correspond 1:1 with
71      the DMA sepecifiers listed in dmas. The string names is to be
72      "rxN" and "txN" for RX and TX requests, respectively. Where N
73      is the chip select number.
74    minItems: 1
75    maxItems: 8
76
77required:
78  - compatible
79  - reg
80  - interrupts
81
82unevaluatedProperties: false
83
84if:
85  properties:
86    compatible:
87      enum:
88        - ti,omap2-mcspi
89        - ti,omap4-mcspi
90
91then:
92  properties:
93    ti,hwmods:
94      items:
95        - pattern: "^mcspi([1-9])$"
96
97else:
98  properties:
99    ti,hwmods: false
100
101examples:
102  - |
103    #include <dt-bindings/interrupt-controller/irq.h>
104    #include <dt-bindings/interrupt-controller/arm-gic.h>
105    #include <dt-bindings/soc/ti,sci_pm_domain.h>
106
107    spi@2100000 {
108      compatible = "ti,am654-mcspi","ti,omap4-mcspi";
109      reg = <0x2100000 0x400>;
110      interrupts = <GIC_SPI 184 IRQ_TYPE_LEVEL_HIGH>;
111      clocks = <&k3_clks 137 1>;
112      power-domains = <&k3_pds 137 TI_SCI_PD_EXCLUSIVE>;
113      #address-cells = <1>;
114      #size-cells = <0>;
115      dmas = <&main_udmap 0xc500>, <&main_udmap 0x4500>;
116      dma-names = "tx0", "rx0";
117    };
118