xref: /linux/Documentation/devicetree/bindings/spi/mediatek,spi-mtk-snfi.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/mediatek,spi-mtk-snfi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: SPI-NAND flash controller for MediaTek ARM SoCs
8
9maintainers:
10  - Chuanhong Guo <gch981213@gmail.com>
11
12description: |
13  The Mediatek SPI-NAND flash controller is an extended version of
14  the Mediatek NAND flash controller. It can perform standard SPI
15  instructions with one continuous write and one read for up-to 0xa0
16  bytes. It also supports typical SPI-NAND page cache operations
17  in single, dual or quad IO mode with pipelined ECC encoding/decoding
18  using the accompanying ECC engine. There should be only one spi
19  slave device following generic spi bindings.
20
21properties:
22  compatible:
23    enum:
24      - mediatek,mt7622-snand
25      - mediatek,mt7629-snand
26      - mediatek,mt7986-snand
27
28  reg:
29    items:
30      - description: core registers
31
32  interrupts:
33    items:
34      - description: NFI interrupt
35
36  clocks:
37    minItems: 2
38    maxItems: 3
39
40  clock-names:
41    minItems: 2
42    maxItems: 3
43
44  nand-ecc-engine:
45    description: device-tree node of the accompanying ECC engine.
46    $ref: /schemas/types.yaml#/definitions/phandle
47
48  mediatek,rx-latch-latency-ns:
49    description: Data read latch latency, unit is nanoseconds.
50
51required:
52  - compatible
53  - reg
54  - interrupts
55  - clocks
56  - clock-names
57  - nand-ecc-engine
58
59allOf:
60  - $ref: /schemas/spi/spi-controller.yaml#
61  - if:
62      properties:
63        compatible:
64          enum:
65            - mediatek,mt7622-snand
66            - mediatek,mt7629-snand
67    then:
68      properties:
69        clocks:
70          items:
71            - description: clock used for the controller
72            - description: clock used for the SPI bus
73        clock-names:
74          items:
75            - const: nfi_clk
76            - const: pad_clk
77
78  - if:
79      properties:
80        compatible:
81          enum:
82            - mediatek,mt7986-snand
83    then:
84      properties:
85        clocks:
86          items:
87            - description: clock used for the controller
88            - description: clock used for the SPI bus
89            - description: clock used for the AHB bus
90        clock-names:
91          items:
92            - const: nfi_clk
93            - const: pad_clk
94            - const: nfi_hclk
95
96unevaluatedProperties: false
97
98examples:
99  - |
100    #include <dt-bindings/interrupt-controller/irq.h>
101    #include <dt-bindings/interrupt-controller/arm-gic.h>
102    #include <dt-bindings/clock/mt7622-clk.h>
103    soc {
104      #address-cells = <2>;
105      #size-cells = <2>;
106      snfi: spi@1100d000 {
107        compatible = "mediatek,mt7622-snand";
108        reg = <0 0x1100d000 0 0x1000>;
109        interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_LOW>;
110        clocks = <&pericfg CLK_PERI_NFI_PD>, <&pericfg CLK_PERI_SNFI_PD>;
111        clock-names = "nfi_clk", "pad_clk";
112        nand-ecc-engine = <&bch>;
113        #address-cells = <1>;
114        #size-cells = <0>;
115
116        flash@0 {
117          compatible = "spi-nand";
118          reg = <0>;
119          spi-tx-bus-width = <4>;
120          spi-rx-bus-width = <4>;
121          nand-ecc-engine = <&snfi>;
122        };
123      };
124    };
125