xref: /linux/Documentation/devicetree/bindings/spi/cdns,xspi.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2# Copyright 2020-21 Cadence
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/spi/cdns,xspi.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: Cadence XSPI Controller
9
10maintainers:
11  - Parshuram Thombare <pthombar@cadence.com>
12
13description: |
14  The XSPI controller allows SPI protocol communication in
15  single, dual, quad or octal wire transmission modes for
16  read/write access to slaves such as SPI-NOR flash.
17
18properties:
19  compatible:
20    enum:
21      - cdns,xspi-nor
22      - marvell,cn10-xspi-nor
23
24  reg:
25    items:
26      - description: address and length of the controller register set
27      - description: address and length of the Slave DMA data port
28      - description: address and length of the auxiliary registers
29      - description: address and length of the xfer registers
30    minItems: 3
31
32  reg-names:
33    items:
34      - const: io
35      - const: sdma
36      - const: aux
37      - const: xfer
38    minItems: 3
39
40  interrupts:
41    maxItems: 1
42
43required:
44  - compatible
45  - reg
46  - interrupts
47
48allOf:
49  - $ref: spi-controller.yaml#
50  - if:
51      properties:
52        compatible:
53          contains:
54            enum:
55              - marvell,cn10-xspi-nor
56    then:
57      properties:
58        reg:
59          minItems: 4
60        reg-names:
61          minItems: 4
62    else:
63      properties:
64        reg:
65          maxItems: 3
66        reg-names:
67          maxItems: 3
68
69unevaluatedProperties: false
70
71examples:
72  - |
73    #include <dt-bindings/interrupt-controller/irq.h>
74    bus {
75        #address-cells = <2>;
76        #size-cells = <2>;
77
78        xspi: spi@a0010000 {
79            #address-cells = <1>;
80            #size-cells = <0>;
81            compatible = "cdns,xspi-nor";
82            reg = <0x0 0xa0010000 0x0 0x1040>,
83                  <0x0 0xb0000000 0x0 0x1000>,
84                  <0x0 0xa0020000 0x0 0x100>;
85            reg-names = "io", "sdma", "aux";
86            interrupts = <0 90 IRQ_TYPE_LEVEL_HIGH>;
87            interrupt-parent = <&gic>;
88
89            flash@0 {
90                compatible = "jedec,spi-nor";
91                spi-max-frequency = <75000000>;
92                reg = <0>;
93            };
94
95            flash@1 {
96                compatible = "jedec,spi-nor";
97                spi-max-frequency = <75000000>;
98                reg = <1>;
99            };
100        };
101    };
102