xref: /linux/Documentation/devicetree/bindings/spi/brcm,bcm63xx-spi.yaml (revision ae22a94997b8a03dcb3c922857c203246711f9d4) 
1# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/spi/brcm,bcm63xx-spi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Broadcom BCM6348/BCM6358 SPI controller
8
9maintainers:
10  - Jonas Gorski <jonas.gorski@gmail.com>
11
12description: |
13  Broadcom "Low Speed" SPI controller found in many older MIPS based Broadband
14  SoCs.
15
16  This controller has a limitation that can not keep the chip select line active
17  between the SPI transfers within the same SPI message. This can terminate the
18  transaction to some SPI devices prematurely. The issue can be worked around by
19  the controller's prepend mode.
20
21allOf:
22  - $ref: spi-controller.yaml#
23
24properties:
25  compatible:
26    oneOf:
27      - items:
28          - enum:
29              - brcm,bcm6368-spi
30              - brcm,bcm6362-spi
31              - brcm,bcm63268-spi
32          - const: brcm,bcm6358-spi
33      - enum:
34          - brcm,bcm6348-spi
35          - brcm,bcm6358-spi
36
37  reg:
38    maxItems: 1
39
40  clocks:
41    items:
42      - description: SPI master reference clock
43
44  clock-names:
45    items:
46      - const: spi
47
48  interrupts:
49    maxItems: 1
50
51required:
52  - compatible
53  - reg
54  - clocks
55  - clock-names
56  - interrupts
57
58unevaluatedProperties: false
59
60examples:
61  - |
62    spi@10000800 {
63        compatible = "brcm,bcm6368-spi", "brcm,bcm6358-spi";
64        reg = <0x10000800 0x70c>;
65        interrupts = <1>;
66        clocks = <&clkctl 9>;
67        clock-names = "spi";
68        num-cs = <5>;
69        #address-cells = <1>;
70        #size-cells = <0>;
71    };
72