xref: /linux/Documentation/devicetree/bindings/sound/renesas,rz-ssi.yaml (revision 06a130e42a5bfc84795464bff023bff4c16f58c5) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/renesas,rz-ssi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Renesas RZ/{G2L,V2L} ASoC Sound Serial Interface (SSIF-2)
8
9maintainers:
10  - Biju Das <biju.das.jz@bp.renesas.com>
11
12allOf:
13  - $ref: dai-common.yaml#
14
15properties:
16  compatible:
17    items:
18      - enum:
19          - renesas,r9a07g043-ssi  # RZ/G2UL and RZ/Five
20          - renesas,r9a07g044-ssi  # RZ/G2{L,LC}
21          - renesas,r9a07g054-ssi  # RZ/V2L
22      - const: renesas,rz-ssi
23
24  reg:
25    maxItems: 1
26
27  interrupts:
28    minItems: 2
29    maxItems: 3
30
31  interrupt-names:
32    oneOf:
33      - items:
34          - const: int_req
35          - const: dma_rx
36          - const: dma_tx
37      - items:
38          - const: int_req
39          - const: dma_rt
40
41  clocks:
42    maxItems: 4
43
44  clock-names:
45    items:
46      - const: ssi
47      - const: ssi_sfr
48      - const: audio_clk1
49      - const: audio_clk2
50
51  power-domains:
52    maxItems: 1
53
54  resets:
55    maxItems: 1
56
57  dmas:
58    minItems: 1
59    maxItems: 2
60    description:
61      The first cell represents a phandle to dmac.
62      The second cell specifies the encoded MID/RID values of the SSI port
63      connected to the DMA client and the slave channel configuration
64      parameters.
65      bits[0:9]   - Specifies MID/RID value of a SSI channel as below
66                    MID/RID value of SSI rx0 = 0x256
67                    MID/RID value of SSI tx0 = 0x255
68                    MID/RID value of SSI rx1 = 0x25a
69                    MID/RID value of SSI tx1 = 0x259
70                    MID/RID value of SSI rt2 = 0x25f
71                    MID/RID value of SSI rx3 = 0x262
72                    MID/RID value of SSI tx3 = 0x261
73      bit[10]     - HIEN = 1, Detects a request in response to the rising edge
74                    of the signal
75      bit[11]     - LVL = 0, Detects based on the edge
76      bits[12:14] - AM = 2, Bus cycle mode
77      bit[15]     - TM = 0, Single transfer mode
78
79  dma-names:
80    oneOf:
81      - items:
82          - const: tx
83          - const: rx
84      - items:
85          - const: rt
86
87  '#sound-dai-cells':
88    const: 0
89
90  port:
91    $ref: audio-graph-port.yaml#/definitions/port-base
92    description: Connection to controller providing I2S signals
93
94required:
95  - compatible
96  - reg
97  - interrupts
98  - interrupt-names
99  - clocks
100  - clock-names
101  - resets
102  - '#sound-dai-cells'
103
104unevaluatedProperties: false
105
106examples:
107  - |
108    #include <dt-bindings/interrupt-controller/arm-gic.h>
109    #include <dt-bindings/clock/r9a07g044-cpg.h>
110
111    ssi0: ssi@10049c00 {
112        compatible = "renesas,r9a07g044-ssi",
113                     "renesas,rz-ssi";
114            reg = <0x10049c00 0x400>;
115            interrupts = <GIC_SPI 326 IRQ_TYPE_LEVEL_HIGH>,
116                         <GIC_SPI 327 IRQ_TYPE_EDGE_RISING>,
117                         <GIC_SPI 328 IRQ_TYPE_EDGE_RISING>;
118            interrupt-names = "int_req", "dma_rx", "dma_tx";
119            clocks = <&cpg CPG_MOD R9A07G044_SSI0_PCLK2>,
120                     <&cpg CPG_MOD R9A07G044_SSI0_PCLK_SFR>,
121                     <&audio_clk1>,
122                     <&audio_clk2>;
123            clock-names = "ssi", "ssi_sfr", "audio_clk1", "audio_clk2";
124            power-domains = <&cpg>;
125            resets = <&cpg R9A07G044_SSI0_RST_M2_REG>;
126            dmas = <&dmac 0x2655>,
127                   <&dmac 0x2656>;
128            dma-names = "tx", "rx";
129            #sound-dai-cells = <0>;
130    };
131