xref: /linux/Documentation/devicetree/bindings/sound/hisilicon,hi6210-i2s.txt (revision a976c2951d8f376112361830aa7762beff83a205)

* Hisilicon 6210 i2s controller

Required properties:

- compatible: should be one of the following:
   - "hisilicon,hi6210-i2s"
- reg: physical base address of the i2s controller unit and length of
   memory mapped region.
- interrupts: should contain the i2s interrupt.
- clocks: a list of phandle + clock-specifier pairs, one for each entry
  in clock-names.
- clock-names: should contain following:
   - "dacodec"
   - "i2s-base"
- dmas: DMA specifiers for tx dma. See the DMA client binding,
  Documentation/devicetree/bindings/dma/dma.txt
- dma-names: should be "tx" and "rx"
- hisilicon,sysctrl-syscon: phandle to sysctrl syscon
- #sound-dai-cells: Should be set to 1 (for multi-dai)
   - The dai cell indexes reference the following interfaces:
       0: S2 interface
       (Currently that is the only one available, but more may be
        supported in the future)

Example for the hi6210 i2s controller:

i2s0: i2s@f7118000{
	compatible = "hisilicon,hi6210-i2s";
	reg = <0x0 0xf7118000 0x0 0x8000>; /* i2s unit */
	interrupts = <GIC_SPI 123 IRQ_TYPE_LEVEL_HIGH>; /* 155 "DigACodec_intr"-32 */
	clocks = <&sys_ctrl HI6220_DACODEC_PCLK>,
		 <&sys_ctrl HI6220_BBPPLL0_DIV>;
	clock-names = "dacodec", "i2s-base";
	dmas = <&dma0 15 &dma0 14>;
	dma-names = "rx", "tx";
	hisilicon,sysctrl-syscon = <&sys_ctrl>;
	#sound-dai-cells = <1>;
};

Then when referencing the i2s controller:
	sound-dai = <&i2s0 0>; /* index 0 => S2 interface */