1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/sound/dialog,da7219.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Dialog Semiconductor DA7219 Audio Codec 8 9maintainers: 10 - David Rau <David.Rau.opensource@dm.renesas.com> 11 12description: 13 The DA7219 is an ultra low-power audio codec with 14 in-built advanced accessory detection (AAD) for mobile 15 computing and accessory applications, which supports 16 sample rates up to 96 kHz at 24-bit resolution. 17 18properties: 19 compatible: 20 const: dlg,da7219 21 22 reg: 23 maxItems: 1 24 25 interrupts: 26 maxItems: 1 27 28 VDD-supply: 29 description: 30 VDD power supply for the device. 31 32 VDDMIC-supply: 33 description: 34 VDDMIC power supply for the device. 35 36 VDDIO-supply: 37 description: 38 VDDIO power supply for the device. 39 40 interrupt-names: 41 description: 42 Should be "wakeup" if interrupt is to be used to wake system, 43 otherwise "irq" should be used. 44 enum: 45 - wakeup 46 - irq 47 48 wakeup-source: 49 type: boolean 50 description: 51 Flag to indicate this device can wake system (suspend/resume). 52 53 "#clock-cells": 54 const: 1 55 56 clock-output-names: 57 minItems: 2 58 maxItems: 2 59 description: 60 Name given for DAI WCLK and BCLK outputs. 61 62 clocks: 63 maxItems: 1 64 description: 65 phandle and clock specifier for codec MCLK. 66 67 clock-names: 68 const: mclk 69 70 dlg,micbias-lvl: 71 enum: [1600, 1800, 2000, 2200, 2400, 2600] 72 description: 73 Voltage (mV) for Mic Bias. 74 $ref: /schemas/types.yaml#/definitions/uint32 75 76 dlg,mic-amp-in-sel: 77 enum: [diff, se_p, se_n] 78 description: 79 Mic input source type. 80 81 diff - Differential. 82 83 se_p - MIC_P. 84 Positive differential analog microphone input. 85 86 se_n - MIC_N. 87 Negative differential analog microphone input. 88 $ref: /schemas/types.yaml#/definitions/string 89 90 da7219_aad: 91 type: object 92 description: 93 Configuration of advanced accessory detection. 94 properties: 95 dlg,micbias-pulse-lvl: 96 enum: [2800, 2900] 97 description: 98 Mic bias higher voltage pulse level (mV). 99 $ref: /schemas/types.yaml#/definitions/uint32 100 101 dlg,micbias-pulse-time: 102 description: 103 Mic bias higher voltage pulse duration (ms). 104 $ref: /schemas/types.yaml#/definitions/uint32 105 minimum: 0 106 107 dlg,btn-cfg: 108 enum: [2, 5, 10, 50, 100, 200, 500] 109 description: 110 Periodic button press measurements for 4-pole jack (ms). 111 $ref: /schemas/types.yaml#/definitions/uint32 112 113 dlg,mic-det-thr: 114 enum: [200, 500, 750, 1000] 115 description: 116 Impedance threshold for mic detection measurement (Ohms). 117 $ref: /schemas/types.yaml#/definitions/uint32 118 119 dlg,jack-ins-deb: 120 enum: [5, 10, 20, 50, 100, 200, 500, 1000] 121 description: 122 Debounce time for jack insertion (ms). 123 $ref: /schemas/types.yaml#/definitions/uint32 124 125 dlg,jack-ins-det-pty: 126 enum: [low, high] 127 description: 128 Polarity for jack insertion detection. 129 $ref: /schemas/types.yaml#/definitions/string 130 131 dlg,jack-det-rate: 132 enum: ["32_64", "64_128", "128_256", "256_512"] 133 description: 134 Jack type (3/4 pole) detection latency (ms). 135 $ref: /schemas/types.yaml#/definitions/string 136 137 dlg,jack-rem-deb: 138 enum: [1, 5, 10, 20] 139 description: 140 Debounce time for jack removal (ms). 141 $ref: /schemas/types.yaml#/definitions/uint32 142 143 dlg,a-d-btn-thr: 144 description: 145 Impedance threshold between buttons A and D. 146 $ref: /schemas/types.yaml#/definitions/uint32 147 minimum: 0 148 maximum: 255 149 150 dlg,d-b-btn-thr: 151 description: 152 Impedance threshold between buttons D and B. 153 $ref: /schemas/types.yaml#/definitions/uint32 154 minimum: 0 155 maximum: 255 156 157 dlg,b-c-btn-thr: 158 description: 159 Impedance threshold between buttons B and C. 160 $ref: /schemas/types.yaml#/definitions/uint32 161 minimum: 0 162 maximum: 255 163 164 dlg,c-mic-btn-thr: 165 description: 166 Impedance threshold between button C and Mic. 167 $ref: /schemas/types.yaml#/definitions/uint32 168 minimum: 0 169 maximum: 255 170 171 dlg,btn-avg: 172 enum: [1, 2, 4, 8] 173 description: 174 Number of 8-bit readings for averaged button measurement. 175 $ref: /schemas/types.yaml#/definitions/uint32 176 177 dlg,adc-1bit-rpt: 178 enum: [1, 2, 4, 8] 179 description: 180 Repeat count for 1-bit button measurement. 181 $ref: /schemas/types.yaml#/definitions/uint32 182 183required: 184 - compatible 185 - reg 186 - interrupts 187 - VDD-supply 188 - VDDMIC-supply 189 - VDDIO-supply 190 191additionalProperties: false 192 193examples: 194 - | 195 #include <dt-bindings/interrupt-controller/irq.h> 196 i2c { 197 #address-cells = <1>; 198 #size-cells = <0>; 199 200 codec: da7219@1a { 201 compatible = "dlg,da7219"; 202 reg = <0x1a>; 203 204 interrupt-parent = <&gpio6>; 205 interrupts = <11 IRQ_TYPE_LEVEL_LOW>; 206 207 VDD-supply = <&vdd_reg>; 208 VDDMIC-supply = <&vddmic_reg>; 209 VDDIO-supply = <&vddio_reg>; 210 211 #clock-cells = <1>; 212 clock-output-names = "da7219-dai-wclk", "da7219-dai-bclk"; 213 214 clocks = <&clks 201>; 215 clock-names = "mclk"; 216 217 dlg,micbias-lvl = <2600>; 218 dlg,mic-amp-in-sel = "diff"; 219 220 da7219_aad { 221 dlg,btn-cfg = <50>; 222 dlg,mic-det-thr = <500>; 223 dlg,jack-ins-deb = <20>; 224 dlg,jack-ins-det-pty = "low"; 225 dlg,jack-det-rate = "32_64"; 226 dlg,jack-rem-deb = <1>; 227 228 dlg,a-d-btn-thr = <0xa>; 229 dlg,d-b-btn-thr = <0x16>; 230 dlg,b-c-btn-thr = <0x21>; 231 dlg,c-mic-btn-thr = <0x3E>; 232 233 dlg,btn-avg = <4>; 234 dlg,adc-1bit-rpt = <1>; 235 }; 236 }; 237 }; 238