xref: /linux/Documentation/devicetree/bindings/sound/adi,max98388.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/sound/adi,max98388.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Analog Devices MAX98388 Speaker Amplifier
8
9maintainers:
10  - Ryan Lee <ryans.lee@analog.com>
11
12description:
13  The MAX98388 is a mono Class-D speaker amplifier with I/V feedback.
14  The device provides a PCM interface for audio data and a standard
15  I2C interface for control data communication.
16
17allOf:
18  - $ref: dai-common.yaml#
19
20properties:
21  compatible:
22    enum:
23      - adi,max98388
24
25  reg:
26    maxItems: 1
27
28  '#sound-dai-cells':
29    const: 0
30
31  adi,vmon-slot-no:
32    description: slot number of the voltage feedback monitor
33    $ref: /schemas/types.yaml#/definitions/uint32
34    minimum: 0
35    maximum: 15
36    default: 0
37
38  adi,imon-slot-no:
39    description: slot number of the current feedback monitor
40    $ref: /schemas/types.yaml#/definitions/uint32
41    minimum: 0
42    maximum: 15
43    default: 1
44
45  adi,interleave-mode:
46    description:
47      For cases where a single combined channel for the I/V feedback data
48      is not sufficient, the device can also be configured to share
49      a single data output channel on alternating frames.
50      In this configuration, the current and voltage data will be frame
51      interleaved on a single output channel.
52    type: boolean
53
54  reset-gpios:
55    maxItems: 1
56
57required:
58  - compatible
59  - reg
60  - '#sound-dai-cells'
61
62unevaluatedProperties: false
63
64examples:
65  - |
66    #include <dt-bindings/gpio/gpio.h>
67    i2c {
68        #address-cells = <1>;
69        #size-cells = <0>;
70        max98388: amplifier@39 {
71            compatible = "adi,max98388";
72            reg = <0x39>;
73            #sound-dai-cells = <0>;
74            adi,vmon-slot-no = <0>;
75            adi,imon-slot-no = <1>;
76            adi,interleave-mode;
77            reset-gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
78        };
79    };
80