xref: /linux/Documentation/devicetree/bindings/soc/qcom/qcom,gsbi.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/soc/qcom/qcom,gsbi.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm General Serial Bus Interface (GSBI)
8
9maintainers:
10  - Andy Gross <agross@kernel.org>
11  - Bjorn Andersson <bjorn.andersson@linaro.org>
12  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
13
14description:
15  The GSBI controller is modeled as a node with zero or more child nodes, each
16  representing a serial sub-node device that is mux'd as part of the GSBI
17  configuration settings.  The mode setting will govern the input/output mode
18  of the 4 GSBI IOs.
19
20  A GSBI controller node can contain 0 or more child nodes representing serial
21  devices.  These serial devices can be a QCOM UART, I2C controller, spi
22  controller, or some combination of aforementioned devices.
23
24properties:
25  compatible:
26    const: qcom,gsbi-v1.0.0
27
28  '#address-cells':
29    const: 1
30
31  cell-index:
32    $ref: /schemas/types.yaml#/definitions/uint32
33    description:
34      The GSBI index.
35
36  clocks:
37    maxItems: 1
38
39  clock-names:
40    const: iface
41
42  qcom,crci:
43    $ref: /schemas/types.yaml#/definitions/uint32
44    description:
45      CRCI MUX value for QUP CRCI ports.  Please reference
46      include/dt-bindings/soc/qcom,gsbi.h for valid CRCI mux values.
47
48  qcom,mode:
49    $ref: /schemas/types.yaml#/definitions/uint32
50    description:
51      MUX value for configuration of the serial interface.  Please reference
52      include/dt-bindings/soc/qcom,gsbi.h for valid mux values.
53
54  '#size-cells':
55    const: 1
56
57  syscon-tcsr:
58    $ref: /schemas/types.yaml#/definitions/phandle
59    description:
60      Phandle of TCSR syscon node.Required if child uses dma.
61
62  ranges: true
63
64  reg:
65    maxItems: 1
66
67patternProperties:
68  "spi@[0-9a-f]+$":
69    type: object
70    $ref: /schemas/spi/qcom,spi-qup.yaml#
71
72  "i2c@[0-9a-f]+$":
73    type: object
74    $ref: /schemas/i2c/qcom,i2c-qup.yaml#
75
76  "serial@[0-9a-f]+$":
77    type: object
78    $ref: /schemas/serial/qcom,msm-uartdm.yaml#
79
80required:
81  - compatible
82  - cell-index
83  - clocks
84  - clock-names
85  - qcom,mode
86  - reg
87
88additionalProperties: false
89
90examples:
91  - |
92    #include <dt-bindings/clock/qcom,gcc-msm8960.h>
93    #include <dt-bindings/interrupt-controller/arm-gic.h>
94    #include <dt-bindings/soc/qcom,gsbi.h>
95
96    gsbi@12440000 {
97        compatible = "qcom,gsbi-v1.0.0";
98        reg = <0x12440000 0x100>;
99        cell-index = <1>;
100        clocks = <&gcc GSBI1_H_CLK>;
101        clock-names = "iface";
102        #address-cells = <1>;
103        #size-cells = <1>;
104        ranges;
105
106        syscon-tcsr = <&tcsr>;
107        qcom,mode = <GSBI_PROT_I2C_UART>;
108
109        serial@12450000 {
110            compatible = "qcom,msm-uartdm-v1.3", "qcom,msm-uartdm";
111            reg = <0x12450000 0x100>,
112                  <0x12400000 0x03>;
113            interrupts = <0 193 IRQ_TYPE_LEVEL_HIGH>;
114            clocks = <&gcc GSBI1_UART_CLK>, <&gcc GSBI1_H_CLK>;
115            clock-names = "core", "iface";
116        };
117
118        i2c@12460000 {
119            compatible = "qcom,i2c-qup-v1.1.1";
120            reg = <0x12460000 0x1000>;
121            pinctrl-0 = <&i2c1_pins>;
122            pinctrl-1 = <&i2c1_pins_sleep>;
123            pinctrl-names = "default", "sleep";
124            interrupts = <0 194 IRQ_TYPE_LEVEL_HIGH>;
125            clocks = <&gcc GSBI1_QUP_CLK>, <&gcc GSBI1_H_CLK>;
126            clock-names = "core", "iface";
127            #address-cells = <1>;
128            #size-cells = <0>;
129
130            status = "disabled"; /* UART chosen */
131        };
132    };
133