xref: /linux/Documentation/devicetree/bindings/serial/fsl-imx-uart.yaml (revision a4eb44a6435d6d8f9e642407a4a06f65eb90ca04) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/serial/fsl-imx-uart.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale i.MX Universal Asynchronous Receiver/Transmitter (UART)
8
9maintainers:
10  - Fabio Estevam <festevam@gmail.com>
11
12allOf:
13  - $ref: "serial.yaml"
14  - $ref: "rs485.yaml"
15
16properties:
17  compatible:
18    oneOf:
19      - const: fsl,imx1-uart
20      - const: fsl,imx21-uart
21      - items:
22          - enum:
23              - fsl,imx25-uart
24              - fsl,imx27-uart
25              - fsl,imx31-uart
26              - fsl,imx35-uart
27              - fsl,imx50-uart
28              - fsl,imx51-uart
29              - fsl,imx53-uart
30              - fsl,imx6q-uart
31          - const: fsl,imx21-uart
32      - items:
33          - enum:
34              - fsl,imx6sl-uart
35              - fsl,imx6sll-uart
36              - fsl,imx6sx-uart
37          - const: fsl,imx6q-uart
38          - const: fsl,imx21-uart
39      - items:
40          - enum:
41              - fsl,imx6ul-uart
42              - fsl,imx7d-uart
43              - fsl,imx8mm-uart
44              - fsl,imx8mn-uart
45              - fsl,imx8mp-uart
46              - fsl,imx8mq-uart
47          - const: fsl,imx6q-uart
48
49  reg:
50    maxItems: 1
51
52  interrupts:
53    maxItems: 1
54
55  fsl,dte-mode:
56    $ref: /schemas/types.yaml#/definitions/flag
57    description: |
58      Indicate the uart works in DTE mode. The uart works in DCE mode by default.
59
60  fsl,inverted-tx:
61    $ref: /schemas/types.yaml#/definitions/flag
62    description: |
63      Indicate that the hardware attached to the peripheral inverts the signal
64      transmitted, and that the peripheral should invert its output using the
65      INVT registers.
66
67  fsl,inverted-rx:
68    $ref: /schemas/types.yaml#/definitions/flag
69    description: |
70      Indicate that the hardware attached to the peripheral inverts the signal
71      received, and that the peripheral should invert its input using the
72      INVR registers.
73
74  fsl,dma-info:
75    $ref: /schemas/types.yaml#/definitions/uint32-array
76    minItems: 2
77    maxItems: 2
78    description: |
79      First cell contains the size of DMA buffer chunks, second cell contains
80      the amount of chunks used for the device. Multiplying both numbers is
81      the total size of memory used for receiving data.
82      When not being configured the system will use default settings, which
83      are sensible for most use cases. If you need low latency processing on
84      slow connections this needs to be configured appropriately.
85
86  uart-has-rtscts: true
87
88  rs485-rts-delay: true
89  rs485-rts-active-low: true
90  rs485-rx-during-tx: true
91  linux,rs485-enabled-at-boot-time: true
92
93required:
94  - compatible
95  - reg
96  - interrupts
97
98unevaluatedProperties: false
99
100examples:
101  - |
102    aliases {
103        serial0 = &uart1;
104    };
105
106    uart1: serial@73fbc000 {
107        compatible = "fsl,imx51-uart", "fsl,imx21-uart";
108        reg = <0x73fbc000 0x4000>;
109        interrupts = <31>;
110        uart-has-rtscts;
111        fsl,dte-mode;
112    };
113