1# Copyright 2020 Lubomir Rintel <lkundrak@v3.sk> 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/serial/8250.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: UART (Universal Asynchronous Receiver/Transmitter) bindings 8 9maintainers: 10 - devicetree@vger.kernel.org 11 12allOf: 13 - $ref: serial.yaml# 14 - if: 15 anyOf: 16 - required: 17 - aspeed,lpc-io-reg 18 - required: 19 - aspeed,lpc-interrupts 20 - required: 21 - aspeed,sirq-polarity-sense 22 then: 23 properties: 24 compatible: 25 const: aspeed,ast2500-vuart 26 - if: 27 properties: 28 compatible: 29 const: mrvl,mmp-uart 30 then: 31 properties: 32 reg-shift: 33 const: 2 34 required: 35 - reg-shift 36 - if: 37 not: 38 properties: 39 compatible: 40 items: 41 - enum: 42 - ns8250 43 - ns16450 44 - ns16550 45 - ns16550a 46 then: 47 anyOf: 48 - required: [ clock-frequency ] 49 - required: [ clocks ] 50 51properties: 52 compatible: 53 oneOf: 54 - const: ns8250 55 - const: ns16450 56 - const: ns16550 57 - const: ns16550a 58 - const: ns16850 59 - const: aspeed,ast2400-vuart 60 - const: aspeed,ast2500-vuart 61 - const: intel,xscale-uart 62 - const: mrvl,pxa-uart 63 - const: nuvoton,wpcm450-uart 64 - const: nuvoton,npcm750-uart 65 - const: nvidia,tegra20-uart 66 - const: nxp,lpc3220-uart 67 - items: 68 - enum: 69 - altr,16550-FIFO32 70 - altr,16550-FIFO64 71 - altr,16550-FIFO128 72 - fsl,16550-FIFO64 73 - fsl,ns16550 74 - andestech,uart16550 75 - nxp,lpc1850-uart 76 - opencores,uart16550-rtlsvn105 77 - ti,da830-uart 78 - const: ns16550a 79 - items: 80 - enum: 81 - ns16750 82 - cavium,octeon-3860-uart 83 - xlnx,xps-uart16550-2.00.b 84 - ralink,rt2880-uart 85 - enum: 86 - ns16550 # Deprecated, unless the FIFO really is broken 87 - ns16550a 88 - items: 89 - enum: 90 - ralink,mt7620a-uart 91 - ralink,rt3052-uart 92 - ralink,rt3883-uart 93 - const: ralink,rt2880-uart 94 - enum: 95 - ns16550 # Deprecated, unless the FIFO really is broken 96 - ns16550a 97 - items: 98 - enum: 99 - mediatek,mt7622-btif 100 - mediatek,mt7623-btif 101 - const: mediatek,mtk-btif 102 - items: 103 - const: mrvl,mmp-uart 104 - const: intel,xscale-uart 105 - items: 106 - enum: 107 - nvidia,tegra30-uart 108 - nvidia,tegra114-uart 109 - nvidia,tegra124-uart 110 - nvidia,tegra186-uart 111 - nvidia,tegra194-uart 112 - nvidia,tegra210-uart 113 - const: nvidia,tegra20-uart 114 115 reg: 116 maxItems: 1 117 118 interrupts: 119 maxItems: 1 120 121 clock-frequency: true 122 123 clocks: 124 maxItems: 1 125 126 resets: 127 maxItems: 1 128 129 current-speed: 130 $ref: /schemas/types.yaml#/definitions/uint32 131 description: The current active speed of the UART. 132 133 reg-offset: 134 description: | 135 Offset to apply to the mapbase from the start of the registers. 136 137 reg-shift: 138 description: Quantity to shift the register offsets by. 139 140 reg-io-width: 141 description: | 142 The size (in bytes) of the IO accesses that should be performed on the 143 device. There are some systems that require 32-bit accesses to the 144 UART (e.g. TI davinci). 145 146 used-by-rtas: 147 type: boolean 148 description: | 149 Set to indicate that the port is in use by the OpenFirmware RTAS and 150 should not be registered. 151 152 no-loopback-test: 153 type: boolean 154 description: | 155 Set to indicate that the port does not implement loopback test mode. 156 157 fifo-size: 158 $ref: /schemas/types.yaml#/definitions/uint32 159 description: The fifo size of the UART. 160 161 auto-flow-control: 162 type: boolean 163 description: | 164 One way to enable automatic flow control support. The driver is 165 allowed to detect support for the capability even without this 166 property. 167 168 tx-threshold: 169 description: | 170 Specify the TX FIFO low water indication for parts with programmable 171 TX FIFO thresholds. 172 173 overrun-throttle-ms: 174 description: | 175 How long to pause uart rx when input overrun is encountered. 176 177 rts-gpios: true 178 cts-gpios: true 179 dtr-gpios: true 180 dsr-gpios: true 181 rng-gpios: true 182 dcd-gpios: true 183 184 aspeed,sirq-polarity-sense: 185 $ref: /schemas/types.yaml#/definitions/phandle-array 186 description: | 187 Phandle to aspeed,ast2500-scu compatible syscon alongside register 188 offset and bit number to identify how the SIRQ polarity should be 189 configured. One possible data source is the LPC/eSPI mode bit. Only 190 applicable to aspeed,ast2500-vuart. 191 deprecated: true 192 193 aspeed,lpc-io-reg: 194 $ref: '/schemas/types.yaml#/definitions/uint32' 195 description: | 196 The VUART LPC address. Only applicable to aspeed,ast2500-vuart. 197 198 aspeed,lpc-interrupts: 199 $ref: "/schemas/types.yaml#/definitions/uint32-array" 200 minItems: 2 201 maxItems: 2 202 description: | 203 A 2-cell property describing the VUART SIRQ number and SIRQ 204 polarity (IRQ_TYPE_LEVEL_LOW or IRQ_TYPE_LEVEL_HIGH). Only 205 applicable to aspeed,ast2500-vuart. 206 207required: 208 - reg 209 - interrupts 210 211unevaluatedProperties: false 212 213examples: 214 - | 215 serial@80230000 { 216 compatible = "ns8250"; 217 reg = <0x80230000 0x100>; 218 interrupts = <10>; 219 reg-shift = <2>; 220 clock-frequency = <48000000>; 221 }; 222 - | 223 #include <dt-bindings/gpio/gpio.h> 224 serial@49042000 { 225 compatible = "andestech,uart16550", "ns16550a"; 226 reg = <0x49042000 0x400>; 227 interrupts = <80>; 228 clock-frequency = <48000000>; 229 cts-gpios = <&gpio3 5 GPIO_ACTIVE_LOW>; 230 rts-gpios = <&gpio3 6 GPIO_ACTIVE_LOW>; 231 dtr-gpios = <&gpio1 12 GPIO_ACTIVE_LOW>; 232 dsr-gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; 233 dcd-gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; 234 rng-gpios = <&gpio1 15 GPIO_ACTIVE_LOW>; 235 }; 236 - | 237 #include <dt-bindings/clock/aspeed-clock.h> 238 #include <dt-bindings/interrupt-controller/irq.h> 239 serial@1e787000 { 240 compatible = "aspeed,ast2500-vuart"; 241 reg = <0x1e787000 0x40>; 242 reg-shift = <2>; 243 interrupts = <8>; 244 clocks = <&syscon ASPEED_CLK_APB>; 245 no-loopback-test; 246 aspeed,lpc-io-reg = <0x3f8>; 247 aspeed,lpc-interrupts = <4 IRQ_TYPE_LEVEL_LOW>; 248 }; 249 250... 251