1TI SysCon Reset Controller 2======================= 3 4Almost all SoCs have hardware modules that require reset control in addition 5to clock and power control for their functionality. The reset control is 6typically provided by means of memory-mapped I/O registers. These registers are 7sometimes a part of a larger register space region implementing various 8functionalities. This register range is best represented as a syscon node to 9allow multiple entities to access their relevant registers in the common 10register space. 11 12A SysCon Reset Controller node defines a device that uses a syscon node 13and provides reset management functionality for various hardware modules 14present on the SoC. 15 16SysCon Reset Controller Node 17============================ 18Each of the reset provider/controller nodes should be a child of a syscon 19node and have the following properties. 20 21Required properties: 22-------------------- 23 - compatible : Should be, 24 "ti,k2e-pscrst" 25 "ti,k2l-pscrst" 26 "ti,k2hk-pscrst" 27 "ti,syscon-reset" 28 - #reset-cells : Should be 1. Please see the reset consumer node below 29 for usage details 30 - ti,reset-bits : Contains the reset control register information 31 Should contain 7 cells for each reset exposed to 32 consumers, defined as: 33 Cell #1 : offset of the reset assert control 34 register from the syscon register base 35 Cell #2 : bit position of the reset in the reset 36 assert control register 37 Cell #3 : offset of the reset deassert control 38 register from the syscon register base 39 Cell #4 : bit position of the reset in the reset 40 deassert control register 41 Cell #5 : offset of the reset status register 42 from the syscon register base 43 Cell #6 : bit position of the reset in the 44 reset status register 45 Cell #7 : Flags used to control reset behavior, 46 available flags defined in the DT include 47 file <dt-bindings/reset/ti-syscon.h> 48 49SysCon Reset Consumer Nodes 50=========================== 51Each of the reset consumer nodes should have the following properties, 52in addition to their own properties. 53 54Required properties: 55-------------------- 56 - resets : A phandle to the reset controller node and an index number 57 to a reset specifier as defined above. 58 59Please also refer to Documentation/devicetree/bindings/reset/reset.txt for 60common reset controller usage by consumers. 61 62Example: 63-------- 64The following example demonstrates a syscon node, the reset controller node 65using the syscon node, and a consumer (a DSP device) on the TI Keystone 2 6666AK2E SoC. 67 68/ { 69 soc { 70 psc: power-sleep-controller@2350000 { 71 compatible = "syscon", "simple-mfd"; 72 reg = <0x02350000 0x1000>; 73 74 pscrst: reset-controller { 75 compatible = "ti,k2e-pscrst", "ti,syscon-reset"; 76 #reset-cells = <1>; 77 78 ti,reset-bits = < 79 0xa3c 8 0xa3c 8 0x83c 8 (ASSERT_CLEAR | DEASSERT_SET | STATUS_CLEAR) /* 0: dsp0 */ 80 0xa40 5 0xa44 3 0 0 (ASSERT_SET | DEASSERT_CLEAR | STATUS_NONE) /* 1: example */ 81 >; 82 }; 83 }; 84 85 dsp0: dsp0 { 86 ... 87 resets = <&pscrst 0>; 88 ... 89 }; 90 }; 91}; 92