1# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/remoteproc/qcom,sm6375-pas.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm SM6375 Peripheral Authentication Service 8 9maintainers: 10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 11 12description: 13 Qualcomm SM6375 SoC Peripheral Authentication Service loads and boots 14 firmware on the Qualcomm DSP Hexagon cores. 15 16properties: 17 compatible: 18 enum: 19 - qcom,sm6375-adsp-pas 20 - qcom,sm6375-cdsp-pas 21 - qcom,sm6375-mpss-pas 22 23 reg: 24 maxItems: 1 25 26 clocks: 27 items: 28 - description: XO clock 29 30 clock-names: 31 items: 32 - const: xo 33 34 memory-region: 35 maxItems: 1 36 description: Reference to the reserved-memory for the Hexagon core 37 38 firmware-name: 39 maxItems: 1 40 description: Firmware name for the Hexagon core 41 42 smd-edge: false 43 44required: 45 - compatible 46 - reg 47 48allOf: 49 - $ref: /schemas/remoteproc/qcom,pas-common.yaml# 50 - if: 51 properties: 52 compatible: 53 enum: 54 - qcom,sm6375-adsp-pas 55 - qcom,sm6375-cdsp-pas 56 then: 57 properties: 58 interrupts: 59 maxItems: 5 60 interrupt-names: 61 maxItems: 5 62 else: 63 properties: 64 interrupts: 65 minItems: 6 66 interrupt-names: 67 minItems: 6 68 69 - if: 70 properties: 71 compatible: 72 enum: 73 - qcom,sm6375-adsp-pas 74 then: 75 properties: 76 power-domains: 77 items: 78 - description: LCX power domain 79 - description: LMX power domain 80 power-domain-names: 81 items: 82 - const: lcx 83 - const: lmx 84 85 - if: 86 properties: 87 compatible: 88 enum: 89 - qcom,sm6375-cdsp-pas 90 - qcom,sm6375-mpss-pas 91 then: 92 properties: 93 power-domains: 94 items: 95 - description: CX power domain 96 power-domain-names: 97 items: 98 - const: cx 99 100unevaluatedProperties: false 101 102examples: 103 - | 104 #include <dt-bindings/clock/qcom,rpmcc.h> 105 #include <dt-bindings/interrupt-controller/arm-gic.h> 106 #include <dt-bindings/mailbox/qcom-ipcc.h> 107 #include <dt-bindings/power/qcom-rpmpd.h> 108 109 remoteproc_adsp: remoteproc@a400000 { 110 compatible = "qcom,sm6375-adsp-pas"; 111 reg = <0x0a400000 0x100>; 112 113 interrupts-extended = <&intc GIC_SPI 282 IRQ_TYPE_LEVEL_HIGH>, 114 <&smp2p_adsp_in 0 IRQ_TYPE_EDGE_RISING>, 115 <&smp2p_adsp_in 1 IRQ_TYPE_EDGE_RISING>, 116 <&smp2p_adsp_in 2 IRQ_TYPE_EDGE_RISING>, 117 <&smp2p_adsp_in 3 IRQ_TYPE_EDGE_RISING>; 118 interrupt-names = "wdog", "fatal", "ready", 119 "handover", "stop-ack"; 120 121 clocks = <&rpmcc RPM_SMD_XO_CLK_SRC>; 122 clock-names = "xo"; 123 124 power-domains = <&rpmpd SM6375_VDD_LPI_CX>, 125 <&rpmpd SM6375_VDD_LPI_MX>; 126 power-domain-names = "lcx", "lmx"; 127 128 memory-region = <&pil_adsp_mem>; 129 130 qcom,smem-states = <&smp2p_adsp_out 0>; 131 qcom,smem-state-names = "stop"; 132 133 glink-edge { 134 interrupts-extended = <&ipcc IPCC_CLIENT_LPASS 135 IPCC_MPROC_SIGNAL_GLINK_QMP 136 IRQ_TYPE_EDGE_RISING>; 137 mboxes = <&ipcc IPCC_CLIENT_LPASS 138 IPCC_MPROC_SIGNAL_GLINK_QMP>; 139 140 label = "lpass"; 141 qcom,remote-pid = <2>; 142 143 /* ... */ 144 }; 145 }; 146