1# SPDX-License-Identifier: GPL-2.0 OR BSD-2-Clause 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/remoteproc/qcom,sc7180-pas.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm SC7180/SC7280 Peripheral Authentication Service 8 9maintainers: 10 - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> 11 12description: 13 Qualcomm SC7180/SC7280 SoC Peripheral Authentication Service loads and boots 14 firmware on the Qualcomm DSP Hexagon cores. 15 16properties: 17 compatible: 18 enum: 19 - qcom,sc7180-adsp-pas 20 - qcom,sc7180-mpss-pas 21 - qcom,sc7280-mpss-pas 22 23 reg: 24 maxItems: 1 25 26 clocks: 27 items: 28 - description: XO clock 29 30 clock-names: 31 items: 32 - const: xo 33 34 memory-region: 35 maxItems: 1 36 description: Reference to the reserved-memory for the Hexagon core 37 38 qcom,qmp: 39 $ref: /schemas/types.yaml#/definitions/phandle 40 description: Reference to the AOSS side-channel message RAM. 41 42 smd-edge: false 43 44 firmware-name: 45 $ref: /schemas/types.yaml#/definitions/string 46 description: Firmware name for the Hexagon core 47 48required: 49 - compatible 50 - reg 51 - memory-region 52 53allOf: 54 - $ref: /schemas/remoteproc/qcom,pas-common.yaml# 55 - if: 56 properties: 57 compatible: 58 enum: 59 - qcom,sc7180-adsp-pas 60 then: 61 properties: 62 interrupts: 63 maxItems: 5 64 interrupt-names: 65 maxItems: 5 66 else: 67 properties: 68 interrupts: 69 minItems: 6 70 interrupt-names: 71 minItems: 6 72 73 - if: 74 properties: 75 compatible: 76 enum: 77 - qcom,sc7180-adsp-pas 78 then: 79 properties: 80 power-domains: 81 items: 82 - description: LCX power domain 83 - description: LMX power domain 84 power-domain-names: 85 items: 86 - const: lcx 87 - const: lmx 88 89 - if: 90 properties: 91 compatible: 92 enum: 93 - qcom,sc7180-mpss-pas 94 then: 95 properties: 96 power-domains: 97 items: 98 - description: CX power domain 99 - description: MX power domain 100 - description: MSS power domain 101 power-domain-names: 102 items: 103 - const: cx 104 - const: mx 105 - const: mss 106 107 - if: 108 properties: 109 compatible: 110 enum: 111 - qcom,sc7280-mpss-pas 112 then: 113 properties: 114 power-domains: 115 items: 116 - description: CX power domain 117 - description: MX power domain 118 power-domain-names: 119 items: 120 - const: cx 121 - const: mx 122 123unevaluatedProperties: false 124 125examples: 126 - | 127 #include <dt-bindings/clock/qcom,rpmh.h> 128 #include <dt-bindings/interrupt-controller/arm-gic.h> 129 #include <dt-bindings/interrupt-controller/irq.h> 130 #include <dt-bindings/power/qcom-rpmpd.h> 131 132 remoteproc@4080000 { 133 compatible = "qcom,sc7180-mpss-pas"; 134 reg = <0x04080000 0x4040>; 135 136 clocks = <&rpmhcc RPMH_CXO_CLK>; 137 clock-names = "xo"; 138 139 interrupts-extended = <&intc GIC_SPI 266 IRQ_TYPE_EDGE_RISING>, 140 <&modem_smp2p_in 0 IRQ_TYPE_EDGE_RISING>, 141 <&modem_smp2p_in 1 IRQ_TYPE_EDGE_RISING>, 142 <&modem_smp2p_in 2 IRQ_TYPE_EDGE_RISING>, 143 <&modem_smp2p_in 3 IRQ_TYPE_EDGE_RISING>, 144 <&modem_smp2p_in 7 IRQ_TYPE_EDGE_RISING>; 145 interrupt-names = "wdog", "fatal", "ready", "handover", 146 "stop-ack", "shutdown-ack"; 147 148 memory-region = <&mpss_mem>; 149 150 power-domains = <&rpmhpd SC7180_CX>, 151 <&rpmhpd SC7180_MX>, 152 <&rpmhpd SC7180_MSS>; 153 power-domain-names = "cx", "mx", "mss"; 154 155 qcom,qmp = <&aoss_qmp>; 156 qcom,smem-states = <&modem_smp2p_out 0>; 157 qcom,smem-state-names = "stop"; 158 159 glink-edge { 160 interrupts = <GIC_SPI 449 IRQ_TYPE_EDGE_RISING>; 161 label = "modem"; 162 qcom,remote-pid = <1>; 163 mboxes = <&apss_shared 12>; 164 }; 165 }; 166