1TPS65023 family of regulators 2 3Required properties: 4- compatible: Must be one of the following. 5 "ti,tps65020", 6 "ti,tps65021", 7 "ti,tps65023", 8- reg: I2C slave address 9- regulators: list of regulators provided by this controller, must be named 10 after their hardware counterparts: VDCDC[1-3] and LDO[1-2] 11- regulators: This is the list of child nodes that specify the regulator 12 initialization data for defined regulators. The definition for each of 13 these nodes is defined using the standard binding for regulators found at 14 Documentation/devicetree/bindings/regulator/regulator.txt. 15 16Each regulator is defined using the standard binding for regulators. 17 18Example: 19 20 tps65023@48 { 21 compatible = "ti,tps65023"; 22 reg = <0x48>; 23 24 regulators { 25 VDCDC1 { 26 regulator-name = "vdd_mpu"; 27 regulator-always-on; 28 regulator-min-microvolt = <1200000>; 29 regulator-max-microvolt = <1200000>; 30 }; 31 32 VDCDC2 { 33 regulator-name = "vdd_core"; 34 regulator-always-on; 35 regulator-min-microvolt = <3300000>; 36 regulator-max-microvolt = <3300000>; 37 }; 38 39 VDCDC3 { 40 regulator-name = "vdd_io"; 41 regulator-always-on; 42 regulator-min-microvolt = <1800000>; 43 regulator-max-microvolt = <1800000>; 44 }; 45 46 LDO1 { 47 regulator-name = "vdd_usb18"; 48 regulator-always-on; 49 regulator-min-microvolt = <1800000>; 50 regulator-max-microvolt = <1800000>; 51 }; 52 53 LDO2 { 54 regulator-name = "vdd_usb33"; 55 regulator-always-on; 56 regulator-min-microvolt = <3300000>; 57 regulator-max-microvolt = <3300000>; 58 }; 59 }; 60 }; 61