xref: /linux/Documentation/devicetree/bindings/regulator/richtek,rt6245-regulator.yaml (revision 2a2dfc869d3345ccdd91322b023f4b0da84acbe7) 
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/regulator/richtek,rt6245-regulator.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Richtek RT6245 High Current Voltage Regulator
8
9maintainers:
10  - ChiYuan Huang <cy_huang@richtek.com>
11
12description: |
13  The RT6245 is a high-performance, synchronous step-down converter
14  that can deliver up to 14A output current with an input supply
15  voltage range of 4.5V to 17V.
16
17allOf:
18  - $ref: regulator.yaml#
19
20properties:
21  compatible:
22    enum:
23      - richtek,rt6245
24
25  reg:
26    maxItems: 1
27
28  enable-gpios:
29    description: |
30      A connection of the chip 'enable' gpio line. If not provided,
31      it will be treat as a default-on power.
32    maxItems: 1
33
34  richtek,oc-level-select:
35    $ref: "/schemas/types.yaml#/definitions/uint8"
36    enum: [0, 1, 2, 3]
37    description: |
38      Over current level selection. Each respective value means the current
39      limit 8A, 14A, 12A, 10A. If this property is missing then keep in
40      in chip default.
41
42  richtek,ot-level-select:
43    $ref: "/schemas/types.yaml#/definitions/uint8"
44    enum: [0, 1, 2]
45    description: |
46      Over temperature level selection. Each respective value means the degree
47      150'c, 130'c, 170'c. If this property is missing then keep in chip
48      default.
49
50  richtek,pgdly-time-select:
51    $ref: "/schemas/types.yaml#/definitions/uint8"
52    enum: [0, 1, 2, 3]
53    description: |
54      Power good signal delay time selection. Each respective value means the
55      delay time 0us, 10us, 20us, 40us. If this property is missing then keep
56      in chip default.
57
58
59  richtek,switch-freq-select:
60    $ref: "/schemas/types.yaml#/definitions/uint8"
61    enum: [0, 1, 2]
62    description: |
63      Buck switch frequency selection. Each respective value means 400KHz,
64      800KHz, 1200KHz. If this property is missing then keep in chip default.
65
66required:
67  - compatible
68  - reg
69
70unevaluatedProperties: false
71
72examples:
73  - |
74    i2c {
75      #address-cells = <1>;
76      #size-cells = <0>;
77
78      rt6245@34 {
79        compatible = "richtek,rt6245";
80        reg = <0x34>;
81        enable-gpios = <&gpio26 2 0>;
82
83        regulator-name = "rt6245-regulator";
84        regulator-min-microvolt = <437500>;
85        regulator-max-microvolt = <1387500>;
86        regulator-boot-on;
87      };
88    };
89