xref: /linux/Documentation/devicetree/bindings/regulator/gpio-regulator.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: GPL-2.0
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/regulator/gpio-regulator.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: GPIO controlled regulators
8
9maintainers:
10  - Liam Girdwood <lgirdwood@gmail.com>
11  - Mark Brown <broonie@kernel.org>
12
13description:
14  Any property defined as part of the core regulator binding, defined in
15  regulator.txt, can also be used.
16
17allOf:
18  - $ref: regulator.yaml#
19
20properties:
21  compatible:
22    const: regulator-gpio
23
24  regulator-name: true
25
26  enable-gpios:
27    description: GPIO to use to enable/disable the regulator.
28      Warning, the GPIO phandle flags are ignored and the GPIO polarity is
29      controlled solely by the presence of "enable-active-high" DT property.
30      This is due to compatibility with old DTs.
31    maxItems: 1
32
33  gpios:
34    description: Array of one or more GPIO pins used to select the regulator
35      voltage/current listed in "states".
36    minItems: 1
37    maxItems: 8  # Should be enough...
38
39  gpios-states:
40    description: |
41      On operating systems, that don't support reading back gpio values in
42      output mode (most notably linux), this array provides the state of GPIO
43      pins set when requesting them from the gpio controller. Systems, that are
44      capable of preserving state when requesting the lines, are free to ignore
45      this property.
46        0: LOW
47        1: HIGH
48      Default is LOW if nothing else is specified.
49    $ref: /schemas/types.yaml#/definitions/uint32-array
50    minItems: 1
51    maxItems: 8
52    items:
53      enum: [0, 1]
54      default: 0
55
56  states:
57    description: Selection of available voltages/currents provided by this
58      regulator and matching GPIO configurations to achieve them. If there are
59      no states in the "states" array, use a fixed regulator instead.
60    $ref: /schemas/types.yaml#/definitions/uint32-matrix
61    minItems: 2
62    maxItems: 256
63    items:
64      items:
65        - description: Voltage in microvolts
66        - description: GPIO group state value
67
68  startup-delay-us:
69    description: startup time in microseconds
70
71  enable-active-high:
72    description: Polarity of "enable-gpio" GPIO is active HIGH. Default is
73      active LOW.
74    type: boolean
75
76  gpio-open-drain:
77    description:
78      GPIO is open drain type. If this property is missing then default
79      assumption is false.
80    type: boolean
81
82  regulator-type:
83    description: Specifies what is being regulated.
84    $ref: /schemas/types.yaml#/definitions/string
85    enum:
86      - voltage
87      - current
88    default: voltage
89
90  vin-supply:
91    description: Input supply phandle.
92
93required:
94  - compatible
95  - regulator-name
96  - gpios
97  - states
98
99unevaluatedProperties: false
100
101examples:
102  - |
103    gpio-regulator {
104      compatible = "regulator-gpio";
105
106      regulator-name = "mmci-gpio-supply";
107      regulator-min-microvolt = <1800000>;
108      regulator-max-microvolt = <2600000>;
109      regulator-boot-on;
110
111      enable-gpios = <&gpio0 23 0x4>;
112      gpios = <&gpio0 24 0x4
113        &gpio0 25 0x4>;
114      states = <1800000 0x3>,
115        <2200000 0x2>,
116        <2600000 0x1>,
117        <2900000 0x0>;
118
119      startup-delay-us = <100000>;
120      enable-active-high;
121    };
122...
123