1* Freescale Serial RapidIO (SRIO) Controller 2 3RapidIO port node: 4Properties: 5 - compatible 6 Usage: required 7 Value type: <string> 8 Definition: Must include "fsl,srio" for IP blocks with IP Block 9 Revision Register (SRIO IPBRR1) Major ID equal to 0x01c0. 10 11 Optionally, a compatible string of "fsl,srio-vX.Y" where X is Major 12 version in IP Block Revision Register and Y is Minor version. If this 13 compatible is provided it should be ordered before "fsl,srio". 14 15 - reg 16 Usage: required 17 Value type: <prop-encoded-array> 18 Definition: A standard property. Specifies the physical address and 19 length of the SRIO configuration registers. The size should 20 be set to 0x11000. 21 22 - interrupts 23 Usage: required 24 Value type: <prop_encoded-array> 25 Definition: Specifies the interrupts generated by this device. The 26 value of the interrupts property consists of one interrupt 27 specifier. The format of the specifier is defined by the 28 binding document describing the node's interrupt parent. 29 30 A single IRQ that handles error conditions is specified by this 31 property. (Typically shared with port-write). 32 33 - fsl,srio-rmu-handle: 34 Usage: required if rmu node is defined 35 Value type: <phandle> 36 Definition: A single <phandle> value that points to the RMU. 37 (See srio-rmu.txt for more details on RMU node binding) 38 39Port Child Nodes: There should a port child node for each port that exists in 40the controller. The ports are numbered starting at one (1) and should have 41the following properties: 42 43 - cell-index 44 Usage: required 45 Value type: <u32> 46 Definition: A standard property. Matches the port id. 47 48 - ranges 49 Usage: required if local access windows preset 50 Value type: <prop-encoded-array> 51 Definition: A standard property. Utilized to describe the memory mapped 52 IO space utilized by the controller. This corresponds to the 53 setting of the local access windows that are targeted to this 54 SRIO port. 55 56 - fsl,liodn 57 Usage: optional-but-recommended (for devices with PAMU) 58 Value type: <prop-encoded-array> 59 Definition: The logical I/O device number for the PAMU (IOMMU) to be 60 correctly configured for SRIO accesses. The property should 61 not exist on devices that do not support PAMU. 62 63 For HW (ie, the P4080) that only supports a LIODN for both 64 memory and maintenance transactions then a single LIODN is 65 represented in the property for both transactions. 66 67 For HW (ie, the P304x/P5020, etc) that supports an LIODN for 68 memory transactions and a unique LIODN for maintenance 69 transactions then a pair of LIODNs are represented in the 70 property. Within the pair, the first element represents the 71 LIODN associated with memory transactions and the second element 72 represents the LIODN associated with maintenance transactions 73 for the port. 74 75Note: All other standard properties (see ePAPR) are allowed but are optional. 76 77Example: 78 79 rapidio: rapidio@ffe0c0000 { 80 #address-cells = <2>; 81 #size-cells = <2>; 82 reg = <0xf 0xfe0c0000 0 0x11000>; 83 compatible = "fsl,srio"; 84 interrupts = <16 2 1 11>; /* err_irq */ 85 fsl,srio-rmu-handle = <&rmu>; 86 ranges; 87 88 port1 { 89 cell-index = <1>; 90 #address-cells = <2>; 91 #size-cells = <2>; 92 fsl,liodn = <34>; 93 ranges = <0 0 0xc 0x20000000 0 0x10000000>; 94 }; 95 96 port2 { 97 cell-index = <2>; 98 #address-cells = <2>; 99 #size-cells = <2>; 100 fsl,liodn = <48>; 101 ranges = <0 0 0xc 0x30000000 0 0x10000000>; 102 }; 103 }; 104