1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply 8 9maintainers: 10 - Sebastian Reichel <sre@kernel.org> 11 12allOf: 13 - $ref: power-supply.yaml# 14 15properties: 16 compatible: 17 enum: 18 - sprd,sc2720-fgu 19 - sprd,sc2721-fgu 20 - sprd,sc2723-fgu 21 - sprd,sc2730-fgu 22 - sprd,sc2731-fgu 23 24 reg: 25 maxItems: 1 26 27 battery-detect-gpios: 28 maxItems: 1 29 30 interrupts: 31 maxItems: 1 32 33 io-channels: 34 items: 35 - description: Battery Temperature ADC 36 - description: Battery Charge Voltage ADC 37 38 io-channel-names: 39 items: 40 - const: bat-temp 41 - const: charge-vol 42 43 nvmem-cells: 44 maxItems: 1 45 description: Calibration cells provided by eFuse device 46 47 nvmem-cell-names: 48 const: fgu_calib 49 50 sprd,calib-resistance-micro-ohms: 51 description: real resistance of coulomb counter chip in micro Ohms 52 53 monitored-battery: true 54 55required: 56 - compatible 57 - reg 58 - battery-detect-gpios 59 - interrupts 60 - io-channels 61 - io-channel-names 62 - nvmem-cells 63 - nvmem-cell-names 64 - sprd,calib-resistance-micro-ohms 65 - monitored-battery 66 67additionalProperties: false 68 69examples: 70 - | 71 #include <dt-bindings/gpio/gpio.h> 72 bat: battery { 73 compatible = "simple-battery"; 74 charge-full-design-microamp-hours = <1900000>; 75 constant-charge-voltage-max-microvolt = <4350000>; 76 ocv-capacity-celsius = <20>; 77 ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, 78 <4022000 85>, <3983000 80>, <3949000 75>, 79 <3917000 70>, <3889000 65>, <3864000 60>, 80 <3835000 55>, <3805000 50>, <3787000 45>, 81 <3777000 40>, <3773000 35>, <3770000 30>, 82 <3765000 25>, <3752000 20>, <3724000 15>, 83 <3680000 10>, <3605000 5>, <3400000 0>; 84 // ... 85 }; 86 87 pmic { 88 #address-cells = <1>; 89 #size-cells = <0>; 90 91 battery@a00 { 92 compatible = "sprd,sc2731-fgu"; 93 reg = <0xa00>; 94 battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; 95 interrupt-parent = <&sc2731_pmic>; 96 interrupts = <4>; 97 io-channels = <&pmic_adc 5>, <&pmic_adc 14>; 98 io-channel-names = "bat-temp", "charge-vol"; 99 nvmem-cells = <&fgu_calib>; 100 nvmem-cell-names = "fgu_calib"; 101 monitored-battery = <&bat>; 102 sprd,calib-resistance-micro-ohms = <21500>; 103 }; 104 }; 105