1# SPDX-License-Identifier: GPL-2.0 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/power/supply/sc27xx-fg.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Spreadtrum SC27XX PMICs Fuel Gauge Unit Power Supply 8 9maintainers: 10 - Sebastian Reichel <sre@kernel.org> 11 12allOf: 13 - $ref: power-supply.yaml# 14 15properties: 16 compatible: 17 enum: 18 - sprd,sc2720-fgu 19 - sprd,sc2721-fgu 20 - sprd,sc2723-fgu 21 - sprd,sc2730-fgu 22 - sprd,sc2731-fgu 23 24 reg: 25 maxItems: 1 26 27 battery-detect-gpios: 28 maxItems: 1 29 30 io-channels: 31 items: 32 - description: Battery Temperature ADC 33 - description: Battery Charge Voltage ADC 34 35 io-channel-names: 36 items: 37 - const: bat-temp 38 - const: charge-vol 39 40 nvmem-cells: 41 maxItems: 1 42 description: Calibration cells provided by eFuse device 43 44 nvmem-cell-names: 45 const: fgu_calib 46 47 sprd,calib-resistance-micro-ohms: 48 description: real resistance of coulomb counter chip in micro Ohms 49 50 monitored-battery: true 51 52required: 53 - compatible 54 - reg 55 - battery-detect-gpios 56 - io-channels 57 - io-channel-names 58 - nvmem-cells 59 - nvmem-cell-names 60 - sprd,calib-resistance-micro-ohms 61 - monitored-battery 62 63additionalProperties: false 64 65examples: 66 - | 67 #include <dt-bindings/gpio/gpio.h> 68 bat: battery { 69 compatible = "simple-battery"; 70 charge-full-design-microamp-hours = <1900000>; 71 constant-charge-voltage-max-microvolt = <4350000>; 72 ocv-capacity-celsius = <20>; 73 ocv-capacity-table-0 = <4185000 100>, <4113000 95>, <4066000 90>, 74 <4022000 85>, <3983000 80>, <3949000 75>, 75 <3917000 70>, <3889000 65>, <3864000 60>, 76 <3835000 55>, <3805000 50>, <3787000 45>, 77 <3777000 40>, <3773000 35>, <3770000 30>, 78 <3765000 25>, <3752000 20>, <3724000 15>, 79 <3680000 10>, <3605000 5>, <3400000 0>; 80 // ... 81 }; 82 83 pmic { 84 #address-cells = <1>; 85 #size-cells = <0>; 86 87 battery@a00 { 88 compatible = "sprd,sc2731-fgu"; 89 reg = <0xa00>; 90 battery-detect-gpios = <&pmic_eic 9 GPIO_ACTIVE_HIGH>; 91 io-channels = <&pmic_adc 5>, <&pmic_adc 14>; 92 io-channel-names = "bat-temp", "charge-vol"; 93 nvmem-cells = <&fgu_calib>; 94 nvmem-cell-names = "fgu_calib"; 95 monitored-battery = <&bat>; 96 sprd,calib-resistance-micro-ohms = <21500>; 97 }; 98 }; 99