xref: /linux/Documentation/devicetree/bindings/pinctrl/starfive,jh7110-sys-pinctrl.yaml (revision 0526b56cbc3c489642bd6a5fe4b718dea7ef0ee8) 
1# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/starfive,jh7110-sys-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: StarFive JH7110 SYS Pin Controller
8
9description: |
10  Bindings for the JH7110 RISC-V SoC from StarFive Technology Ltd.
11
12  Out of the SoC's many pins only the ones named PAD_GPIO0 to PAD_GPIO63
13  can be multiplexed and have configurable bias, drive strength,
14  schmitt trigger etc.
15  Some peripherals have their I/O go through the 64 "GPIOs". This also
16  includes a number of other UARTs, I2Cs, SPIs, PWMs etc.
17  All these peripherals are connected to all 64 GPIOs such that
18  any GPIO can be set up to be controlled by any of the peripherals.
19
20maintainers:
21  - Jianlong Huang <jianlong.huang@starfivetech.com>
22
23properties:
24  compatible:
25    const: starfive,jh7110-sys-pinctrl
26
27  reg:
28    maxItems: 1
29
30  clocks:
31    maxItems: 1
32
33  resets:
34    maxItems: 1
35
36  interrupts:
37    maxItems: 1
38
39  interrupt-controller: true
40
41  '#interrupt-cells':
42    const: 2
43
44  gpio-controller: true
45
46  '#gpio-cells':
47    const: 2
48
49patternProperties:
50  '-[0-9]+$':
51    type: object
52    additionalProperties: false
53    patternProperties:
54      '-pins$':
55        type: object
56        description: |
57          A pinctrl node should contain at least one subnode representing the
58          pinctrl groups available on the machine. Each subnode will list the
59          pins it needs, and how they should be configured, with regard to
60          muxer configuration, bias, input enable/disable, input schmitt
61          trigger enable/disable, slew-rate and drive strength.
62        allOf:
63          - $ref: /schemas/pinctrl/pincfg-node.yaml
64          - $ref: /schemas/pinctrl/pinmux-node.yaml
65        additionalProperties: false
66
67        properties:
68          pinmux:
69            description: |
70              The list of GPIOs and their mux settings that properties in the
71              node apply to. This should be set using the GPIOMUX or PINMUX
72              macros.
73
74          bias-disable: true
75
76          bias-pull-up:
77            type: boolean
78
79          bias-pull-down:
80            type: boolean
81
82          drive-strength:
83            enum: [ 2, 4, 8, 12 ]
84
85          input-enable: true
86
87          input-disable: true
88
89          input-schmitt-enable: true
90
91          input-schmitt-disable: true
92
93          slew-rate:
94            maximum: 1
95
96required:
97  - compatible
98  - reg
99  - clocks
100  - interrupts
101  - interrupt-controller
102  - '#interrupt-cells'
103  - gpio-controller
104  - '#gpio-cells'
105
106additionalProperties: false
107
108examples:
109  - |
110    pinctrl@13040000 {
111        compatible = "starfive,jh7110-sys-pinctrl";
112        reg = <0x13040000 0x10000>;
113        clocks = <&syscrg 112>;
114        resets = <&syscrg 2>;
115        interrupts = <86>;
116        interrupt-controller;
117        #interrupt-cells = <2>;
118        gpio-controller;
119        #gpio-cells = <2>;
120
121        uart0-0 {
122            tx-pins {
123                pinmux = <0xff140005>;
124                bias-disable;
125                drive-strength = <12>;
126                input-disable;
127                input-schmitt-disable;
128                slew-rate = <0>;
129            };
130
131            rx-pins {
132                pinmux = <0x0E000406>;
133                bias-pull-up;
134                drive-strength = <2>;
135                input-enable;
136                input-schmitt-enable;
137                slew-rate = <0>;
138            };
139        };
140    };
141
142...
143