xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,sm6115-tlmm.yaml (revision fd7d598270724cc787982ea48bbe17ad383a8b7f) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm6115-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SM6115, SM4250 TLMM block
8
9maintainers:
10  - Iskren Chernev <iskren.chernev@gmail.com>
11
12description:
13  Top Level Mode Multiplexer pin controller in Qualcomm SM4250 and SM6115
14  SoCs.
15
16properties:
17  compatible:
18    const: qcom,sm6115-tlmm
19
20  reg:
21    maxItems: 3
22
23  reg-names:
24    items:
25      - const: west
26      - const: south
27      - const: east
28
29  interrupts:
30    maxItems: 1
31
32  interrupt-controller: true
33  "#interrupt-cells": true
34  gpio-controller: true
35  "#gpio-cells": true
36  gpio-ranges: true
37  gpio-reserved-ranges: true
38  wakeup-parent: true
39
40patternProperties:
41  "-state$":
42    oneOf:
43      - $ref: "#/$defs/qcom-sm6115-tlmm-state"
44      - patternProperties:
45          "-pins$":
46            $ref: "#/$defs/qcom-sm6115-tlmm-state"
47        additionalProperties: false
48
49$defs:
50  qcom-sm6115-tlmm-state:
51    type: object
52    description:
53      Pinctrl node's client devices use subnodes for desired pin configuration.
54      Client device subnodes use below standard properties.
55    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
56    unevaluatedProperties: false
57
58    properties:
59      pins:
60        description:
61          List of gpio pins affected by the properties specified in this
62          subnode.
63        items:
64          oneOf:
65            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
66            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data,
67                      sdc2_clk, sdc2_cmd, sdc2_data, ufs_reset ]
68        minItems: 1
69        maxItems: 36
70
71      function:
72        description:
73          Specify the alternative function to be configured for the specified
74          pins.
75
76        enum: [ adsp_ext, agera_pll, atest, cam_mclk, cci_async, cci_i2c,
77                cci_timer, cri_trng, dac_calib, dbg_out, ddr_bist, ddr_pxi0,
78                ddr_pxi1, ddr_pxi2, ddr_pxi3, gcc_gp1, gcc_gp2, gcc_gp3, gpio,
79                gp_pdm0, gp_pdm1, gp_pdm2, gsm0_tx, gsm1_tx, jitter_bist,
80                mdp_vsync, mdp_vsync_out_0, mdp_vsync_out_1, mpm_pwr, mss_lte,
81                m_voc, nav_gpio, pa_indicator, pbs, pbs_out, phase_flag,
82                pll_bist, pll_bypassnl, pll_reset, prng_rosc, qdss_cti,
83                qdss_gpio, qup0, qup1, qup2, qup3, qup4, qup5, sdc1_tb,
84                sdc2_tb, sd_write, ssbi_wtr1, tgu, tsense_pwm, uim1_clk,
85                uim1_data, uim1_present, uim1_reset, uim2_clk, uim2_data,
86                uim2_present, uim2_reset, usb_phy, vfr_1, vsense_trigger,
87                wlan1_adc0, elan1_adc1 ]
88
89    required:
90      - pins
91
92allOf:
93  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
94
95required:
96  - compatible
97  - reg
98  - reg-names
99
100additionalProperties: false
101
102examples:
103  - |
104    #include <dt-bindings/interrupt-controller/arm-gic.h>
105    tlmm: pinctrl@500000 {
106        compatible = "qcom,sm6115-tlmm";
107        reg = <0x500000 0x400000>,
108              <0x900000 0x400000>,
109              <0xd00000 0x400000>;
110        reg-names = "west", "south", "east";
111        interrupts = <GIC_SPI 227 IRQ_TYPE_LEVEL_HIGH>;
112        gpio-controller;
113        #gpio-cells = <2>;
114        interrupt-controller;
115        #interrupt-cells = <2>;
116        gpio-ranges = <&tlmm 0 0 114>;
117
118        sdc2_on_state: sdc2-on-state {
119            clk-pins {
120                pins = "sdc2_clk";
121                bias-disable;
122                drive-strength = <16>;
123            };
124
125            cmd-pins {
126                pins = "sdc2_cmd";
127                bias-pull-up;
128                drive-strength = <10>;
129            };
130
131            data-pins {
132                pins = "sdc2_data";
133                bias-pull-up;
134                drive-strength = <10>;
135            };
136
137            sd-cd-pins {
138                pins = "gpio88";
139                function = "gpio";
140                bias-pull-up;
141                drive-strength = <2>;
142            };
143        };
144    };
145