1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pinctrl/qcom,sdx55-pinctrl.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm Technologies, Inc. SDX55 TLMM block 8 9maintainers: 10 - Vinod Koul <vkoul@kernel.org> 11 12description: 13 Top Level Mode Multiplexer pin controller in Qualcomm SDX55 SoC. 14 15properties: 16 compatible: 17 const: qcom,sdx55-pinctrl 18 19 reg: 20 description: Specifies the base address and size of the TLMM register space 21 maxItems: 1 22 23 interrupts: 24 maxItems: 1 25 26 gpio-reserved-ranges: 27 maxItems: 1 28 29patternProperties: 30 "-state$": 31 oneOf: 32 - $ref: "#/$defs/qcom-sdx55-tlmm-state" 33 - patternProperties: 34 "-pins$": 35 $ref: "#/$defs/qcom-sdx55-tlmm-state" 36 additionalProperties: false 37 38$defs: 39 qcom-sdx55-tlmm-state: 40 type: object 41 description: 42 Pinctrl node's client devices use subnodes for desired pin configuration. 43 Client device subnodes use below standard properties. 44 $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state 45 unevaluatedProperties: false 46 47 properties: 48 pins: 49 description: 50 List of gpio pins affected by the properties specified in this subnode. 51 items: 52 oneOf: 53 - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-7])$" 54 - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, sdc2_data ] 55 minItems: 1 56 maxItems: 36 57 58 function: 59 description: 60 Specify the alternative function to be configured for the specified 61 pins. Functions are only valid for gpio pins. 62 enum: [ adsp_ext, atest, audio_ref, bimc_dte0, bimc_dte1, blsp_i2c1, 63 blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_spi1, blsp_spi2, 64 blsp_spi3, blsp_spi4, blsp_uart1, blsp_uart2, blsp_uart3, 65 blsp_uart4, char_exec, coex_uart, coex_uart2, cri_trng, 66 cri_trng0, cri_trng1, dbg_out, ddr_bist, ddr_pxi0, 67 ebi0_wrcdc, ebi2_a, ebi2_lcd, emac_gcc0, emac_gcc1, 68 emac_pps0, emac_pps1, ext_dbg, gcc_gp1, gcc_gp2, gcc_gp3, 69 gcc_plltest, gpio, i2s_mclk, jitter_bist, ldo_en, ldo_update, 70 mgpi_clk, m_voc, native_char, native_char0, native_char1, 71 native_char2, native_char3, native_tsens, native_tsense, 72 nav_gpio, pa_indicator, pcie_clkreq, pci_e, pll_bist, pll_ref, 73 pll_test, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio, 74 qdss_gpio0, qdss_gpio1, qdss_gpio2, qdss_gpio3, qdss_gpio4, 75 qdss_gpio5, qdss_gpio6, qdss_gpio7, qdss_gpio8, qdss_gpio9, 76 qdss_gpio10, qdss_gpio11, qdss_gpio12, qdss_gpio13, 77 qdss_gpio14, qdss_gpio15, qdss_stm0, qdss_stm1, qdss_stm2, 78 qdss_stm3, qdss_stm4, qdss_stm5, qdss_stm6, qdss_stm7, 79 qdss_stm8, qdss_stm9, qdss_stm10, qdss_stm11, qdss_stm12, 80 qdss_stm13, qdss_stm14, qdss_stm15, qdss_stm16, qdss_stm17, 81 qdss_stm18, qdss_stm19, qdss_stm20, qdss_stm21, qdss_stm22, 82 qdss_stm23, qdss_stm24, qdss_stm25, qdss_stm26, qdss_stm27, 83 qdss_stm28, qdss_stm29, qdss_stm30, qdss_stm31, qlink0_en, 84 qlink0_req, qlink0_wmss, qlink1_en, qlink1_req, qlink1_wmss, 85 spmi_coex, sec_mi2s, spmi_vgi, tgu_ch0, uim1_clk, uim1_data, 86 uim1_present, uim1_reset, uim2_clk, uim2_data, uim2_present, 87 uim2_reset, usb2phy_ac, vsense_trigger ] 88 89 required: 90 - pins 91 92allOf: 93 - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# 94 95required: 96 - compatible 97 - reg 98 99unevaluatedProperties: false 100 101examples: 102 - | 103 #include <dt-bindings/interrupt-controller/arm-gic.h> 104 tlmm: pinctrl@1f00000 { 105 compatible = "qcom,sdx55-pinctrl"; 106 reg = <0x0f100000 0x300000>; 107 gpio-controller; 108 #gpio-cells = <2>; 109 gpio-ranges = <&tlmm 0 0 108>; 110 interrupt-controller; 111 #interrupt-cells = <2>; 112 interrupts = <GIC_SPI 212 IRQ_TYPE_LEVEL_HIGH>; 113 114 serial-state { 115 pins = "gpio8", "gpio9"; 116 function = "blsp_uart3"; 117 drive-strength = <8>; 118 bias-disable; 119 }; 120 }; 121 122... 123