xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,sc7180-pinctrl.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sc7180-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SC7180 TLMM pin controller
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in Qualcomm SC7180 SoC.
15
16properties:
17  compatible:
18    const: qcom,sc7180-pinctrl
19
20  reg:
21    maxItems: 3
22
23  reg-names:
24    items:
25      - const: west
26      - const: north
27      - const: south
28
29  interrupts:
30    maxItems: 1
31
32  gpio-reserved-ranges:
33    minItems: 1
34    maxItems: 60
35
36  gpio-line-names:
37    maxItems: 119
38
39patternProperties:
40  "-state$":
41    oneOf:
42      - $ref: "#/$defs/qcom-sc7180-tlmm-state"
43      - patternProperties:
44          "-pins$":
45            $ref: "#/$defs/qcom-sc7180-tlmm-state"
46        additionalProperties: false
47
48$defs:
49  qcom-sc7180-tlmm-state:
50    type: object
51    description:
52      Pinctrl node's client devices use subnodes for desired pin configuration.
53      Client device subnodes use below standard properties.
54    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
55    unevaluatedProperties: false
56
57    properties:
58      pins:
59        description:
60          List of gpio pins affected by the properties specified in this
61          subnode.
62        items:
63          oneOf:
64            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-8])$"
65            - enum: [ sdc1_rclk, sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk,
66                      sdc2_cmd, sdc2_data, ufs_reset ]
67        minItems: 1
68        maxItems: 36
69
70      function:
71        description:
72          Specify the alternative function to be configured for the specified
73          pins.
74
75        enum: [ adsp_ext, agera_pll, aoss_cti, atest_char, atest_char0,
76                atest_char1, atest_char2, atest_char3, atest_tsens,
77                atest_tsens2, atest_usb1, atest_usb10, atest_usb11,
78                atest_usb12, atest_usb13, atest_usb2, atest_usb20, atest_usb21,
79                atest_usb22, atest_usb23, audio_ref, btfm_slimbus, cam_mclk,
80                cci_async, cci_i2c, cci_timer0, cci_timer1, cci_timer2,
81                cci_timer3, cci_timer4, cri_trng, dbg_out, ddr_bist, ddr_pxi0,
82                ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot, edp_lcd, gcc_gp1,
83                gcc_gp2, gcc_gp3, gpio, gp_pdm0, gp_pdm1, gp_pdm2, gps_tx,
84                jitter_bist, ldo_en, ldo_update, lpass_ext, mdp_vsync,
85                mdp_vsync0, mdp_vsync1, mdp_vsync2, mdp_vsync3, mi2s_0, mi2s_1,
86                mi2s_2, mss_lte, m_voc, pa_indicator, phase_flag, PLL_BIST,
87                pll_bypassnl, pll_reset, prng_rosc, qdss, qdss_cti,
88                qlink_enable, qlink_request, qspi_clk, qspi_cs, qspi_data,
89                qup00, qup01, qup02_i2c, qup02_uart, qup03, qup04_i2c,
90                qup04_uart, qup05, qup10, qup11_i2c, qup11_uart, qup12,
91                qup13_i2c, qup13_uart, qup14, qup15, sdc1_tb, sdc2_tb,
92                sd_write, sp_cmu, tgu_ch0, tgu_ch1, tgu_ch2, tgu_ch3,
93                tsense_pwm1, tsense_pwm2, uim1, uim2, uim_batt, usb_phy, vfr_1,
94                _V_GPIO, _V_PPS_IN, _V_PPS_OUT, vsense_trigger, wlan1_adc0,
95                wlan1_adc1, wlan2_adc0, wlan2_adc1 ]
96
97    required:
98      - pins
99
100allOf:
101  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
102
103required:
104  - compatible
105  - reg
106  - reg-names
107
108unevaluatedProperties: false
109
110examples:
111  - |
112    #include <dt-bindings/interrupt-controller/arm-gic.h>
113
114    tlmm: pinctrl@3500000 {
115        compatible = "qcom,sc7180-pinctrl";
116        reg = <0x03500000 0x300000>,
117              <0x03900000 0x300000>,
118              <0x03d00000 0x300000>;
119        reg-names = "west", "north", "south";
120        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
121        gpio-controller;
122        #gpio-cells = <2>;
123        interrupt-controller;
124        #interrupt-cells = <2>;
125        gpio-ranges = <&tlmm 0 0 120>;
126        wakeup-parent = <&pdc>;
127
128        dp_hot_plug_det: dp-hot-plug-det-state {
129            pins = "gpio117";
130            function = "dp_hot";
131        };
132
133        qup_spi11_cs_gpio: qup-spi11-cs-gpio-state {
134            spi-pins {
135                pins = "gpio53", "gpio54", "gpio55";
136                function = "qup15";
137            };
138
139            cs-pins {
140                pins = "gpio56";
141                function = "gpio";
142            };
143        };
144    };
145