xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.yaml (revision 34dc1baba215b826e454b8d19e4f24adbeb7d00d)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,qcs404-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm QCS404 TLMM pin controller
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in Qualcomm QCS404 SoC.
15
16properties:
17  compatible:
18    const: qcom,qcs404-pinctrl
19
20  reg:
21    maxItems: 3
22
23  reg-names:
24    items:
25      - const: south
26      - const: north
27      - const: east
28
29  interrupts:
30    maxItems: 1
31
32  interrupt-controller: true
33  "#interrupt-cells": true
34  gpio-controller: true
35  "#gpio-cells": true
36  gpio-ranges: true
37  wakeup-parent: true
38
39  gpio-reserved-ranges:
40    minItems: 1
41    maxItems: 60
42
43  gpio-line-names:
44    maxItems: 120
45
46patternProperties:
47  "-state$":
48    oneOf:
49      - $ref: "#/$defs/qcom-qcs404-tlmm-state"
50      - patternProperties:
51          "-pins$":
52            $ref: "#/$defs/qcom-qcs404-tlmm-state"
53        additionalProperties: false
54
55$defs:
56  qcom-qcs404-tlmm-state:
57    type: object
58    description:
59      Pinctrl node's client devices use subnodes for desired pin configuration.
60      Client device subnodes use below standard properties.
61    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
62    unevaluatedProperties: false
63
64    properties:
65      pins:
66        description:
67          List of gpio pins affected by the properties specified in this
68          subnode.
69        items:
70          oneOf:
71            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-1][0-9])$"
72            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk,
73                      sdc2_cmd, sdc2_data, ufs_reset ]
74        minItems: 1
75        maxItems: 36
76
77      function:
78        description:
79          Specify the alternative function to be configured for the specified
80          pins.
81
82        enum: [ gpio, adsp_ext, atest_char, atest_char0, atest_char1,
83                atest_char2, atest_char3, aud_cdc, audio_ts, bimc_dte0,
84                bimc_dte1, blsp_i2c0, blsp_i2c1, blsp_i2c3, blsp_i2c4,
85                blsp_i2c5, blsp_i2c_scl_a2, blsp_i2c_scl_b2, blsp_i2c_sda_a2,
86                blsp_i2c_sda_b2, blsp_spi0, blsp_spi2, blsp_spi3, blsp_spi4,
87                blsp_spi5, blsp_spi_clk_a1, blsp_spi_clk_b1, blsp_spi_cs_n_a1,
88                blsp_spi_cs_n_b1, blsp_spi_miso_a1, blsp_spi_miso_b1,
89                blsp_spi_mosi_a1, blsp_spi_mosi_b1, blsp_uart0, blsp_uart1,
90                blsp_uart2, blsp_uart3, blsp_uart5, blsp_uart_rx_a2,
91                blsp_uart_rx_b2, blsp_uart_tx_a2, blsp_uart_tx_b2, cri_trng,
92                cri_trng0, cri_trng1, dbg_out, dsd_clk_a, dsd_clk_b, ebi2_a,
93                ebi2_lcd, ebi_cdc, ebi_ch0, ext_lpass, ext_mclk0, ext_mclk1_a,
94                ext_mclk1_b, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
95                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest,
96                gcc_tlmm, hdmi_ddc, hdmi_dtest, hdmi_lbk0, hdmi_lbk1,
97                hdmi_lbk2, hdmi_lbk3, hdmi_lbk4, hdmi_lbk5, hdmi_lbk6,
98                hdmi_lbk7, hdmi_lbk8, hdmi_lbk9, hdmi_pixel, hdmi_rcv, hdmi_tx,
99                i2s_1, i2s_2, i2s_3_data0_a, i2s_3_data0_b, i2s_3_data1_a,
100                i2s_3_data1_b, i2s_3_data2_a, i2s_3_data2_b, i2s_3_data3_a,
101                i2s_3_data3_b, i2s_3_sck_a, i2s_3_sck_b, i2s_3_ws_a,
102                i2s_3_ws_b, i2s_4, ir_in, ldo_en, ldo_update, mclk_in1,
103                mclk_in2, m_voc, nfc_dwl, nfc_irq, pcie_clk, pll_bist,
104                prng_rosc, pwm_led1, pwm_led10, pwm_led11, pwm_led12,
105                pwm_led13, pwm_led14, pwm_led15, pwm_led16, pwm_led17,
106                pwm_led18, pwm_led19, pwm_led2, pwm_led20, pwm_led21,
107                pwm_led22, pwm_led23, pwm_led24, pwm_led3, pwm_led4, pwm_led5,
108                pwm_led6, pwm_led7, pwm_led8, pwm_led9, qdss_cti_trig_in_a0,
109                qdss_cti_trig_in_a1, qdss_cti_trig_in_b0, qdss_cti_trig_in_b1,
110                qdss_cti_trig_out_a0, qdss_cti_trig_out_a1,
111                qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, qdss_traceclk_a,
112                qdss_traceclk_b, qdss_tracectl_a, qdss_tracectl_b,
113                qdss_tracedata_a, qdss_tracedata_b, rgb_clk, rgb_data0,
114                rgb_data1, rgb_data2, rgb_data3, rgb_data4, rgb_data5,
115                rgb_data6, rgb_data7, rgb_data_b0, rgb_data_b1, rgb_data_b2,
116                rgb_data_b3, rgb_data_b4, rgb_data_b5, rgb_data_b6,
117                rgb_data_b7, rgb_de, rgb_hsync, rgb_mdp, rgb_vsync, rgmi_dll1,
118                rgmi_dll2, rgmii_ck, rgmii_ctl, rgmii_int, rgmii_mdc,
119                rgmii_mdio, rgmii_rx, rgmii_tx, rgmii_wol, sd_write,
120                spdifrx_opt, spi_lcd, spkr_dac0, wlan1_adc0, wlan1_adc1,
121                wlan2_adc0, wlan2_adc1, wsa_en ]
122
123    required:
124      - pins
125
126allOf:
127  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
128
129required:
130  - compatible
131  - reg
132
133additionalProperties: false
134
135examples:
136  - |
137    #include <dt-bindings/interrupt-controller/arm-gic.h>
138
139    tlmm: pinctrl@1000000 {
140        compatible = "qcom,qcs404-pinctrl";
141        reg = <0x01000000 0x200000>,
142              <0x01300000 0x200000>,
143              <0x07b00000 0x200000>;
144        reg-names = "south", "north", "east";
145        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
146        gpio-ranges = <&tlmm 0 0 120>;
147        gpio-controller;
148        #gpio-cells = <2>;
149        interrupt-controller;
150        #interrupt-cells = <2>;
151
152
153        blsp1-i2c1-default-state {
154            pins = "gpio24", "gpio25";
155            function = "blsp_i2c1";
156        };
157
158        blsp1-i2c2-default-state {
159            sda-pins {
160                pins = "gpio19";
161                function = "blsp_i2c_sda_a2";
162            };
163
164            scl-pins {
165                pins = "gpio20";
166                function = "blsp_i2c_scl_a2";
167            };
168        };
169    };
170