xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,msm8909-tlmm.yaml (revision e6a901a00822659181c93c86d8bbc2a17779fddc) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,msm8909-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. MSM8909 TLMM block
8
9maintainers:
10  - Stephan Gerhold <stephan@gerhold.net>
11
12description: |
13  Top Level Mode Multiplexer pin controller in Qualcomm MSM8909 SoC.
14
15allOf:
16  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
17
18properties:
19  compatible:
20    const: qcom,msm8909-tlmm
21
22  reg:
23    maxItems: 1
24
25  interrupts:
26    maxItems: 1
27
28  gpio-reserved-ranges: true
29
30patternProperties:
31  "-state$":
32    oneOf:
33      - $ref: "#/$defs/qcom-msm8909-tlmm-state"
34      - patternProperties:
35          "-pins$":
36            $ref: "#/$defs/qcom-msm8909-tlmm-state"
37        additionalProperties: false
38
39$defs:
40  qcom-msm8909-tlmm-state:
41    type: object
42    description:
43      Pinctrl node's client devices use subnodes for desired pin configuration.
44      Client device subnodes use below standard properties.
45    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
46    unevaluatedProperties: false
47
48    properties:
49      pins:
50        description:
51          List of gpio pins affected by the properties specified in this
52          subnode.
53        items:
54          oneOf:
55            - pattern: "^gpio([0-9]|[1-9][0-9]|10[0-9]|11[0-2])$"
56            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,
57                      sdc2_data, qdsd_clk, qdsd_cmd, qdsd_data0, qdsd_data1,
58                      qdsd_data2, qdsd_data3 ]
59        minItems: 1
60        maxItems: 16
61
62      function:
63        description:
64          Specify the alternative function to be configured for the specified
65          pins.
66        enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0,
67                atest_char1, atest_char2, atest_char3, atest_combodac,
68                atest_gpsadc0, atest_gpsadc1, atest_wlan0, atest_wlan1,
69                bimc_dte0, bimc_dte1, blsp_i2c1, blsp_i2c2, blsp_i2c3,
70                blsp_i2c4, blsp_i2c5, blsp_i2c6, blsp_spi1, blsp_spi1_cs1,
71                blsp_spi1_cs2, blsp_spi1_cs3, blsp_spi2, blsp_spi2_cs1,
72                blsp_spi2_cs2, blsp_spi2_cs3, blsp_spi3, blsp_spi3_cs1,
73                blsp_spi3_cs2, blsp_spi3_cs3, blsp_spi4, blsp_spi5, blsp_spi6,
74                blsp_uart1, blsp_uart2, blsp_uim1, blsp_uim2, cam_mclk,
75                cci_async, cci_timer0, cci_timer1, cci_timer2, cdc_pdm0,
76                dbg_out, dmic0_clk, dmic0_data, ebi0_wrcdc, ebi2_a, ebi2_lcd,
77                ext_lpass, gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a,
78                gcc_gp2_clk_b, gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gpio,
79                gsm0_tx, ldo_en, ldo_update, m_voc, mdp_vsync, modem_tsync,
80                nav_pps, nav_tsync, pa_indicator, pbs0, pbs1, pbs2,
81                pri_mi2s_data0_a, pri_mi2s_data0_b, pri_mi2s_data1_a,
82                pri_mi2s_data1_b, pri_mi2s_mclk_a, pri_mi2s_mclk_b,
83                pri_mi2s_sck_a, pri_mi2s_sck_b, pri_mi2s_ws_a, pri_mi2s_ws_b,
84                prng_rosc, pwr_crypto_enabled_a, pwr_crypto_enabled_b,
85                pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a,
86                pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1,
87                qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0,
88                qdss_cti_trig_out_a1, qdss_cti_trig_out_b0,
89                qdss_cti_trig_out_b1, qdss_traceclk_a, qdss_tracectl_a,
90                qdss_tracedata_a, qdss_tracedata_b, sd_write, sec_mi2s,
91                smb_int, ssbi0, ssbi1, uim1_clk, uim1_data, uim1_present,
92                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
93                uim3_clk, uim3_data, uim3_present, uim3_reset, uim_batt,
94                wcss_bt, wcss_fm, wcss_wlan ]
95
96    required:
97      - pins
98
99required:
100  - compatible
101  - reg
102
103unevaluatedProperties: false
104
105examples:
106  - |
107    #include <dt-bindings/interrupt-controller/arm-gic.h>
108
109    pinctrl@1000000 {
110        compatible = "qcom,msm8909-tlmm";
111        reg = <0x1000000 0x300000>;
112        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
113        gpio-controller;
114        #gpio-cells = <2>;
115        gpio-ranges = <&tlmm 0 0 113>;
116        interrupt-controller;
117        #interrupt-cells = <2>;
118
119        gpio-wo-subnode-state {
120            pins = "gpio1";
121            function = "gpio";
122        };
123
124        uart-w-subnodes-state {
125            rx-pins {
126                pins = "gpio4";
127                function = "blsp_uart1";
128                bias-pull-up;
129            };
130
131            tx-pins {
132                pins = "gpio5";
133                function = "blsp_uart1";
134                bias-disable;
135            };
136        };
137    };
138...
139