1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pinctrl/qcom,mdm9607-tlmm.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Qualcomm Technologies, Inc. MDM9607 TLMM block 8 9maintainers: 10 - Konrad Dybcio <konrad.dybcio@somainline.org> 11 12description: 13 Top Level Mode Multiplexer pin controller in Qualcomm MDM9607 SoC. 14 15allOf: 16 - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml# 17 18properties: 19 compatible: 20 const: qcom,mdm9607-tlmm 21 22 reg: 23 maxItems: 1 24 25 interrupts: 26 maxItems: 1 27 28 gpio-reserved-ranges: true 29 30patternProperties: 31 "-state$": 32 oneOf: 33 - $ref: "#/$defs/qcom-mdm9607-tlmm-state" 34 - additionalProperties: false 35 patternProperties: 36 ".*": 37 $ref: "#/$defs/qcom-mdm9607-tlmm-state" 38 39$defs: 40 qcom-mdm9607-tlmm-state: 41 type: object 42 description: 43 Pinctrl node's client devices use subnodes for desired pin configuration. 44 Client device subnodes use below standard properties. 45 $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state 46 unevaluatedProperties: false 47 48 properties: 49 pins: 50 description: 51 List of gpio pins affected by the properties specified in this 52 subnode. 53 items: 54 oneOf: 55 - pattern: "^gpio([1-9]|[1-7][0-9]|80)$" 56 - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd, 57 sdc2_data, qdsd_cmd, qdsd_data0, qdsd_data1, qdsd_data2, 58 qdsd_data3 ] 59 minItems: 1 60 maxItems: 16 61 62 function: 63 description: 64 Specify the alternative function to be configured for the specified 65 pins. 66 67 enum: [ adsp_ext, atest_bbrx0, atest_bbrx1, atest_char, atest_char0, 68 atest_char1, atest_char2, atest_char3, 69 atest_combodac_to_gpio_native, atest_gpsadc_dtest0_native, 70 atest_gpsadc_dtest1_native, atest_tsens, backlight_en_b, 71 bimc_dte0, bimc_dte1, blsp1_spi, blsp2_spi, blsp3_spi, 72 blsp_i2c1, blsp_i2c2, blsp_i2c3, blsp_i2c4, blsp_i2c5, 73 blsp_i2c6, blsp_spi1, blsp_spi2, blsp_spi3, blsp_spi4, 74 blsp_spi5, blsp_spi6, blsp_uart1, blsp_uart2, blsp_uart3, 75 blsp_uart4, blsp_uart5, blsp_uart6, blsp_uim1, blsp_uim2, 76 codec_int, codec_rst, coex_uart, cri_trng, cri_trng0, 77 cri_trng1, dbg_out, ebi0_wrcdc, ebi2_a, ebi2_a_d_8_b, 78 ebi2_lcd, ebi2_lcd_cs_n_b, ebi2_lcd_te_b, eth_irq, eth_rst, 79 gcc_gp1_clk_a, gcc_gp1_clk_b, gcc_gp2_clk_a, gcc_gp2_clk_b, 80 gcc_gp3_clk_a, gcc_gp3_clk_b, gcc_plltest, gcc_tlmm, gmac_mdio, 81 gpio, gsm0_tx, lcd_rst, ldo_en, ldo_update, m_voc, modem_tsync, 82 nav_ptp_pps_in_a, nav_ptp_pps_in_b, nav_tsync_out_a, 83 nav_tsync_out_b, pa_indicator, pbs0, pbs1, pbs2, 84 pri_mi2s_data0_a, pri_mi2s_data1_a, pri_mi2s_mclk_a, 85 pri_mi2s_sck_a, pri_mi2s_ws_a, prng_rosc, ptp_pps_out_a, 86 ptp_pps_out_b, pwr_crypto_enabled_a, pwr_crypto_enabled_b, 87 pwr_modem_enabled_a, pwr_modem_enabled_b, pwr_nav_enabled_a, 88 pwr_nav_enabled_b, qdss_cti_trig_in_a0, qdss_cti_trig_in_a1, 89 qdss_cti_trig_in_b0, qdss_cti_trig_in_b1, qdss_cti_trig_out_a0, 90 qdss_cti_trig_out_a1, qdss_cti_trig_out_b0, qdss_cti_trig_out_b1, 91 qdss_traceclk_a, qdss_traceclk_b, qdss_tracectl_a, 92 qdss_tracectl_b, qdss_tracedata_a, qdss_tracedata_b, rcm_marker1, 93 rcm_marker2, sd_write, sec_mi2s, sensor_en, sensor_int2, 94 sensor_int3, sensor_rst, ssbi1, ssbi2, touch_rst, ts_int, 95 uim1_clk, uim1_data, uim1_present, uim1_reset, uim2_clk, 96 uim2_data, uim2_present, uim2_reset, uim_batt, wlan_en1, ] 97 98 required: 99 - pins 100 101required: 102 - compatible 103 - reg 104 105unevaluatedProperties: false 106 107examples: 108 - | 109 #include <dt-bindings/interrupt-controller/arm-gic.h> 110 tlmm: pinctrl@1000000 { 111 compatible = "qcom,mdm9607-tlmm"; 112 reg = <0x01000000 0x300000>; 113 interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>; 114 gpio-controller; 115 gpio-ranges = <&msmgpio 0 0 80>; 116 #gpio-cells = <2>; 117 interrupt-controller; 118 #interrupt-cells = <2>; 119 }; 120