xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-tlmm.yaml (revision 06d07429858317ded2db7986113a9e0129cd599b) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SM8550 TLMM block
8
9maintainers:
10  - Abel Vesa <abel.vesa@linaro.org>
11
12description:
13  Top Level Mode Multiplexer pin controller in Qualcomm SM8550 SoC.
14
15allOf:
16  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
17
18properties:
19  compatible:
20    const: qcom,sm8550-tlmm
21
22  reg:
23    maxItems: 1
24
25  interrupts:
26    maxItems: 1
27
28  gpio-reserved-ranges:
29    minItems: 1
30    maxItems: 105
31
32  gpio-line-names:
33    maxItems: 210
34
35patternProperties:
36  "-state$":
37    oneOf:
38      - $ref: "#/$defs/qcom-sm8550-tlmm-state"
39      - patternProperties:
40          "-pins$":
41            $ref: "#/$defs/qcom-sm8550-tlmm-state"
42        additionalProperties: false
43
44$defs:
45  qcom-sm8550-tlmm-state:
46    type: object
47    description:
48      Pinctrl node's client devices use subnodes for desired pin configuration.
49      Client device subnodes use below standard properties.
50    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
51    unevaluatedProperties: false
52
53    properties:
54      pins:
55        description:
56          List of gpio pins affected by the properties specified in this
57          subnode.
58        items:
59          oneOf:
60            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-9][0-9]|20[0-9])$"
61            - enum: [ ufs_reset, sdc2_clk, sdc2_cmd, sdc2_data ]
62        minItems: 1
63        maxItems: 36
64
65      function:
66        description:
67          Specify the alternative function to be configured for the specified
68          pins.
69        enum: [ aon_cci, aoss_cti, atest_char, atest_usb,
70                audio_ext_mclk0, audio_ext_mclk1, audio_ref_clk,
71                cam_aon_mclk4, cam_mclk, cci_async_in, cci_i2c_scl,
72                cci_i2c_sda, cci_timer, cmu_rng, coex_uart1_rx,
73                coex_uart1_tx, coex_uart2_rx, coex_uart2_tx,
74                cri_trng, dbg_out_clk, ddr_bist_complete,
75                ddr_bist_fail, ddr_bist_start, ddr_bist_stop,
76                ddr_pxi0, ddr_pxi1, ddr_pxi2, ddr_pxi3, dp_hot,
77                gcc_gp1, gcc_gp2, gcc_gp3, gpio, i2chub0_se0,
78                i2chub0_se1, i2chub0_se2, i2chub0_se3, i2chub0_se4,
79                i2chub0_se5, i2chub0_se6, i2chub0_se7, i2chub0_se8,
80                i2chub0_se9, i2s0_data0, i2s0_data1, i2s0_sck,
81                i2s0_ws, i2s1_data0, i2s1_data1, i2s1_sck, i2s1_ws,
82                ibi_i3c, jitter_bist, mdp_vsync, mdp_vsync0_out,
83                mdp_vsync1_out, mdp_vsync2_out, mdp_vsync3_out,
84                mdp_vsync_e, nav_gpio0, nav_gpio1, nav_gpio2,
85                pcie0_clk_req_n, pcie1_clk_req_n, phase_flag,
86                pll_bist_sync, pll_clk_aux, prng_rosc0, prng_rosc1,
87                prng_rosc2, prng_rosc3, qdss_cti, qdss_gpio,
88                qlink0_enable, qlink0_request, qlink0_wmss,
89                qlink1_enable, qlink1_request, qlink1_wmss,
90                qlink2_enable, qlink2_request, qlink2_wmss,
91                qspi0, qspi1, qspi2, qspi3, qspi_clk, qspi_cs,
92                qup1_se0, qup1_se1, qup1_se2, qup1_se3, qup1_se4,
93                qup1_se5, qup1_se6, qup1_se7, qup2_se0,
94                qup2_se0_l0_mira, qup2_se0_l0_mirb, qup2_se0_l1_mira,
95                qup2_se0_l1_mirb, qup2_se0_l2_mira, qup2_se0_l2_mirb,
96                qup2_se0_l3_mira, qup2_se0_l3_mirb, qup2_se1,
97                qup2_se2, qup2_se3, qup2_se4, qup2_se5, qup2_se6,
98                qup2_se7, sd_write_protect, sdc40, sdc41, sdc42,
99                sdc43, sdc4_clk, sdc4_cmd, tb_trig_sdc2, tb_trig_sdc4,
100                tgu_ch0_trigout, tgu_ch1_trigout, tgu_ch2_trigout,
101                tgu_ch3_trigout, tmess_prng0, tmess_prng1, tmess_prng2,
102                tmess_prng3, tsense_pwm1, tsense_pwm2, tsense_pwm3,
103                uim0_clk, uim0_data, uim0_present, uim0_reset,
104                uim1_clk, uim1_data, uim1_present, uim1_reset,
105                usb1_hs, usb_phy, vfr_0, vfr_1, vsense_trigger_mirnat ]
106
107    required:
108      - pins
109
110required:
111  - compatible
112  - reg
113
114unevaluatedProperties: false
115
116examples:
117  - |
118    #include <dt-bindings/interrupt-controller/arm-gic.h>
119    tlmm: pinctrl@f100000 {
120        compatible = "qcom,sm8550-tlmm";
121        reg = <0x0f100000 0x300000>;
122        gpio-controller;
123        #gpio-cells = <2>;
124        gpio-ranges = <&tlmm 0 0 211>;
125        interrupt-controller;
126        #interrupt-cells = <2>;
127        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
128
129        gpio-wo-state {
130            pins = "gpio1";
131            function = "gpio";
132        };
133
134        uart-w-state {
135            rx-pins {
136                pins = "gpio26";
137                function = "qup2_se7";
138                bias-pull-up;
139            };
140
141            tx-pins {
142                pins = "gpio27";
143                function = "qup2_se7";
144                bias-disable;
145            };
146        };
147    };
148...
149