xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml (revision 41c177cf354126a22443b5c80cec9fdd313e67e1) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sm8550-lpass-lpi-pinctrl.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SM8550 SoC LPASS LPI TLMM
8
9maintainers:
10  - Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
11  - Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
12
13description:
14  Top Level Mode Multiplexer pin controller in the Low Power Audio SubSystem
15  (LPASS) Low Power Island (LPI) of Qualcomm SM8550 SoC.
16
17properties:
18  compatible:
19    oneOf:
20      - const: qcom,sm8550-lpass-lpi-pinctrl
21      - items:
22          - const: qcom,x1e80100-lpass-lpi-pinctrl
23          - const: qcom,sm8550-lpass-lpi-pinctrl
24
25  reg:
26    items:
27      - description: LPASS LPI TLMM Control and Status registers
28      - description: LPASS LPI MCC registers
29
30  clocks:
31    items:
32      - description: LPASS Core voting clock
33      - description: LPASS Audio voting clock
34
35  clock-names:
36    items:
37      - const: core
38      - const: audio
39
40patternProperties:
41  "-state$":
42    oneOf:
43      - $ref: "#/$defs/qcom-sm8550-lpass-state"
44      - patternProperties:
45          "-pins$":
46            $ref: "#/$defs/qcom-sm8550-lpass-state"
47        additionalProperties: false
48
49$defs:
50  qcom-sm8550-lpass-state:
51    type: object
52    description:
53      Pinctrl node's client devices use subnodes for desired pin configuration.
54      Client device subnodes use below standard properties.
55    $ref: qcom,lpass-lpi-common.yaml#/$defs/qcom-tlmm-state
56    unevaluatedProperties: false
57
58    properties:
59      pins:
60        description:
61          List of gpio pins affected by the properties specified in this
62          subnode.
63        items:
64          pattern: "^gpio([0-9]|1[0-9]|2[0-2])$"
65
66      function:
67        enum: [ dmic1_clk, dmic1_data, dmic2_clk, dmic2_data, dmic3_clk,
68                dmic3_data, dmic4_clk, dmic4_data, ext_mclk1_a, ext_mclk1_b,
69                ext_mclk1_c, ext_mclk1_d, ext_mclk1_e, gpio, i2s0_clk,
70                i2s0_data, i2s0_ws, i2s1_clk, i2s1_data, i2s1_ws, i2s2_clk,
71                i2s2_data, i2s2_ws, i2s3_clk, i2s3_data, i2s3_ws, i2s4_clk,
72                i2s4_data, i2s4_ws, slimbus_clk, slimbus_data, swr_rx_clk,
73                swr_rx_data, swr_tx_clk, swr_tx_data, wsa_swr_clk,
74                wsa_swr_data, wsa2_swr_clk, wsa2_swr_data ]
75        description:
76          Specify the alternative function to be configured for the specified
77          pins.
78
79allOf:
80  - $ref: qcom,lpass-lpi-common.yaml#
81
82required:
83  - compatible
84  - reg
85  - clocks
86  - clock-names
87
88unevaluatedProperties: false
89
90examples:
91  - |
92    #include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
93
94    lpass_tlmm: pinctrl@6e80000 {
95        compatible = "qcom,sm8550-lpass-lpi-pinctrl";
96        reg = <0x06e80000 0x20000>,
97              <0x0725a000 0x10000>;
98
99        clocks = <&q6prmcc LPASS_HW_MACRO_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>,
100                 <&q6prmcc LPASS_HW_DCODEC_VOTE LPASS_CLK_ATTRIBUTE_COUPLE_NO>;
101        clock-names = "core", "audio";
102
103        gpio-controller;
104        #gpio-cells = <2>;
105        gpio-ranges = <&lpass_tlmm 0 0 23>;
106
107        tx-swr-sleep-clk-state {
108            pins = "gpio0";
109            function = "swr_tx_clk";
110            drive-strength = <2>;
111            bias-pull-down;
112        };
113    };
114