xref: /linux/Documentation/devicetree/bindings/pinctrl/qcom,sdx75-tlmm.yaml (revision 60a2f25de7b8b785baee2932db932ae9a5b8c86d) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pinctrl/qcom,sdx75-tlmm.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm Technologies, Inc. SDX75 TLMM block
8
9maintainers:
10  - Rohit Agarwal <quic_rohiagar@quicinc.com>
11
12description:
13  Top Level Mode Multiplexer pin controller in Qualcomm SDX75 SoC.
14
15allOf:
16  - $ref: /schemas/pinctrl/qcom,tlmm-common.yaml#
17
18properties:
19  compatible:
20    const: qcom,sdx75-tlmm
21
22  reg:
23    maxItems: 1
24
25  interrupts:
26    maxItems: 1
27
28  gpio-reserved-ranges:
29    minItems: 1
30    maxItems: 67
31
32  gpio-line-names:
33    maxItems: 133
34
35patternProperties:
36  "-state$":
37    oneOf:
38      - $ref: "#/$defs/qcom-sdx75-tlmm-state"
39      - patternProperties:
40          "-pins$":
41            $ref: "#/$defs/qcom-sdx75-tlmm-state"
42        additionalProperties: false
43
44$defs:
45  qcom-sdx75-tlmm-state:
46    type: object
47    description:
48      Pinctrl node's client devices use subnodes for desired pin configuration.
49      Client device subnodes use below standard properties.
50    $ref: qcom,tlmm-common.yaml#/$defs/qcom-tlmm-state
51    unevaluatedProperties: false
52
53    properties:
54      pins:
55        description:
56          List of gpio pins affected by the properties specified in this
57          subnode.
58        items:
59          oneOf:
60            - pattern: "^gpio([0-9]|[1-9][0-9]|1[0-2][0-9]|13[0-2])$"
61            - enum: [ sdc1_clk, sdc1_cmd, sdc1_data, sdc1_rclk, sdc2_clk, sdc2_cmd, sdc2_data ]
62        minItems: 1
63        maxItems: 36
64
65      function:
66        description:
67          Specify the alternative function to be configured for the specified
68          pins.
69        enum: [ adsp_ext, atest_char, audio_ref_clk, bimc_dte, char_exec, coex_uart2,
70                coex_uart, cri_trng, cri_trng0, cri_trng1, dbg_out_clk, ddr_bist,
71                ddr_pxi0, ebi0_wrcdc, ebi2_a, ebi2_lcd, ebi2_lcd_te, emac0_mcg,
72                emac0_ptp, emac1_mcg, emac1_ptp, emac_cdc, emac_pps_in, eth0_mdc,
73                eth0_mdio, eth1_mdc, eth1_mdio, ext_dbg, gcc_125_clk, gcc_gp1_clk,
74                gcc_gp2_clk, gcc_gp3_clk, gcc_plltest, gpio, i2s_mclk, jitter_bist,
75                ldo_en, ldo_update, m_voc, mgpi_clk, native_char, native_tsens,
76                native_tsense, nav_dr_sync, nav_gpio, pa_indicator, pci_e,
77                pcie0_clkreq_n, pcie1_clkreq_n, pcie2_clkreq_n, pll_bist_sync,
78                pll_clk_aux, pll_ref_clk, pri_mi2s, prng_rosc, qdss_cti, qdss_gpio,
79                qlink0_b_en, qlink0_b_req, qlink0_l_en, qlink0_l_req, qlink0_wmss,
80                qlink1_l_en, qlink1_l_req, qlink1_wmss, qup_se0, qup_se1_l2_mira,
81                qup_se1_l2_mirb, qup_se1_l3_mira, qup_se1_l3_mirb, qup_se2, qup_se3,
82                qup_se4, qup_se5, qup_se6, qup_se7, qup_se8, rgmii_rx_ctl, rgmii_rxc,
83                rgmii_rxd, rgmii_tx_ctl, rgmii_txc, rgmii_txd, sd_card, sdc1_tb,
84                sdc2_tb_trig, sec_mi2s, sgmii_phy_intr0_n, sgmii_phy_intr1_n,
85                spmi_coex, spmi_vgi, tgu_ch0_trigout, tmess_prng0, tmess_prng1,
86                tmess_prng2, tmess_prng3, tri_mi2s, uim1_clk, uim1_data, uim1_present,
87                uim1_reset, uim2_clk, uim2_data, uim2_present, uim2_reset,
88                usb2phy_ac_en, vsense_trigger_mirnat]
89
90    required:
91      - pins
92
93required:
94  - compatible
95  - reg
96
97unevaluatedProperties: false
98
99examples:
100  - |
101    #include <dt-bindings/interrupt-controller/arm-gic.h>
102    tlmm: pinctrl@f100000 {
103        compatible = "qcom,sdx75-tlmm";
104        reg = <0x0f100000 0x300000>;
105        gpio-controller;
106        #gpio-cells = <2>;
107        gpio-ranges = <&tlmm 0 0 133>;
108        interrupt-controller;
109        #interrupt-cells = <2>;
110        interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;
111
112        gpio-wo-state {
113            pins = "gpio1";
114            function = "gpio";
115        };
116
117        uart-w-state {
118            rx-pins {
119                pins = "gpio12";
120                function = "qup_se1_l2_mira";
121                bias-disable;
122            };
123
124            tx-pins {
125                pins = "gpio13";
126                function = "qup_se1_l3_mira";
127                bias-disable;
128            };
129        };
130    };
131...
132