1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pinctrl/mediatek,mt65xx-pinctrl.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: MediaTek MT65xx Pin Controller 8 9maintainers: 10 - Sean Wang <sean.wang@kernel.org> 11 12description: 13 The MediaTek's MT65xx Pin controller is used to control SoC pins. 14 15properties: 16 compatible: 17 enum: 18 - mediatek,mt2701-pinctrl 19 - mediatek,mt2712-pinctrl 20 - mediatek,mt6397-pinctrl 21 - mediatek,mt7623-pinctrl 22 - mediatek,mt8127-pinctrl 23 - mediatek,mt8135-pinctrl 24 - mediatek,mt8167-pinctrl 25 - mediatek,mt8173-pinctrl 26 - mediatek,mt8516-pinctrl 27 28 reg: 29 maxItems: 1 30 31 pins-are-numbered: 32 $ref: /schemas/types.yaml#/definitions/flag 33 description: 34 Specify the subnodes are using numbered pinmux to specify pins. (UNUSED) 35 deprecated: true 36 37 gpio-controller: true 38 39 "#gpio-cells": 40 const: 2 41 description: 42 Number of cells in GPIO specifier. Since the generic GPIO binding is used, 43 the amount of cells must be specified as 2. See the below mentioned gpio 44 binding representation for description of particular cells. 45 46 mediatek,pctl-regmap: 47 $ref: /schemas/types.yaml#/definitions/phandle-array 48 items: 49 maxItems: 1 50 minItems: 1 51 maxItems: 2 52 description: 53 Should be phandles of the syscfg node. 54 55 interrupt-controller: true 56 57 interrupts: 58 minItems: 1 59 maxItems: 3 60 61 "#interrupt-cells": 62 const: 2 63 64required: 65 - compatible 66 - gpio-controller 67 - "#gpio-cells" 68 69allOf: 70 - $ref: pinctrl.yaml# 71 72patternProperties: 73 'pins$': 74 type: object 75 additionalProperties: false 76 patternProperties: 77 '(^pins|pins?$)': 78 type: object 79 additionalProperties: false 80 description: 81 A pinctrl node should contain at least one subnodes representing the 82 pinctrl groups available on the machine. Each subnode will list the 83 pins it needs, and how they should be configured, with regard to muxer 84 configuration, pullups, drive strength, input enable/disable and input 85 schmitt. 86 $ref: /schemas/pinctrl/pincfg-node.yaml 87 88 properties: 89 pinmux: 90 description: 91 Integer array, represents gpio pin number and mux setting. 92 Supported pin number and mux varies for different SoCs, and are 93 defined as macros in dt-bindings/pinctrl/<soc>-pinfunc.h directly. 94 95 bias-disable: true 96 97 bias-pull-up: 98 description: 99 Besides generic pinconfig options, it can be used as the pull up 100 settings for 2 pull resistors, R0 and R1. User can configure those 101 special pins. Some macros have been defined for this usage, such 102 as MTK_PUPD_SET_R1R0_00. See dt-bindings/pinctrl/mt65xx.h for 103 valid arguments. 104 105 bias-pull-down: true 106 107 input-enable: true 108 109 input-disable: true 110 111 output-low: true 112 113 output-high: true 114 115 input-schmitt-enable: true 116 117 input-schmitt-disable: true 118 119 drive-strength: 120 description: 121 Can support some arguments, such as MTK_DRIVE_4mA, MTK_DRIVE_6mA, 122 etc. See dt-bindings/pinctrl/mt65xx.h for valid arguments. 123 124 required: 125 - pinmux 126 127additionalProperties: false 128 129examples: 130 - | 131 #include <dt-bindings/interrupt-controller/irq.h> 132 #include <dt-bindings/interrupt-controller/arm-gic.h> 133 #include <dt-bindings/pinctrl/mt8135-pinfunc.h> 134 135 soc { 136 #address-cells = <2>; 137 #size-cells = <2>; 138 139 syscfg_pctl_a: syscfg-pctl-a@10005000 { 140 compatible = "mediatek,mt8135-pctl-a-syscfg", "syscon"; 141 reg = <0 0x10005000 0 0x1000>; 142 }; 143 144 syscfg_pctl_b: syscfg-pctl-b@1020c020 { 145 compatible = "mediatek,mt8135-pctl-b-syscfg", "syscon"; 146 reg = <0 0x1020C020 0 0x1000>; 147 }; 148 149 pinctrl@1c20800 { 150 compatible = "mediatek,mt8135-pinctrl"; 151 reg = <0 0x1000B000 0 0x1000>; 152 mediatek,pctl-regmap = <&syscfg_pctl_a>, <&syscfg_pctl_b>; 153 gpio-controller; 154 #gpio-cells = <2>; 155 interrupt-controller; 156 #interrupt-cells = <2>; 157 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>, 158 <GIC_SPI 117 IRQ_TYPE_LEVEL_HIGH>, 159 <GIC_SPI 118 IRQ_TYPE_LEVEL_HIGH>; 160 161 i2c0_pins_a: i2c0-pins { 162 pins1 { 163 pinmux = <MT8135_PIN_100_SDA0__FUNC_SDA0>, 164 <MT8135_PIN_101_SCL0__FUNC_SCL0>; 165 bias-disable; 166 }; 167 }; 168 169 i2c1_pins_a: i2c1-pins { 170 pins { 171 pinmux = <MT8135_PIN_195_SDA1__FUNC_SDA1>, 172 <MT8135_PIN_196_SCL1__FUNC_SCL1>; 173 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 174 }; 175 }; 176 177 i2c2_pins_a: i2c2-pins { 178 pins1 { 179 pinmux = <MT8135_PIN_193_SDA2__FUNC_SDA2>; 180 bias-pull-down; 181 }; 182 183 pins2 { 184 pinmux = <MT8135_PIN_49_WATCHDOG__FUNC_GPIO49>; 185 bias-pull-up; 186 }; 187 }; 188 189 i2c3_pins_a: i2c3-pins { 190 pins1 { 191 pinmux = <MT8135_PIN_40_DAC_CLK__FUNC_GPIO40>, 192 <MT8135_PIN_41_DAC_WS__FUNC_GPIO41>; 193 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 194 }; 195 196 pins2 { 197 pinmux = <MT8135_PIN_35_SCL3__FUNC_SCL3>, 198 <MT8135_PIN_36_SDA3__FUNC_SDA3>; 199 output-low; 200 bias-pull-up = <MTK_PUPD_SET_R1R0_01>; 201 }; 202 203 pins3 { 204 pinmux = <MT8135_PIN_57_JTCK__FUNC_GPIO57>, 205 <MT8135_PIN_60_JTDI__FUNC_JTDI>; 206 drive-strength = <32>; 207 }; 208 }; 209 }; 210 }; 211