xref: /linux/Documentation/devicetree/bindings/phy/starfive,jh7110-dphy-rx.yaml (revision ad30469a841b50dbb541df4d6971d891f703c297) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/starfive,jh7110-dphy-rx.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: StarFive SoC JH7110 MIPI D-PHY Rx Controller
8
9maintainers:
10  - Jack Zhu <jack.zhu@starfivetech.com>
11  - Changhuang Liang <changhuang.liang@starfivetech.com>
12
13description:
14  StarFive SoCs contain a MIPI CSI D-PHY based on M31 IP, used to
15  transfer CSI camera data.
16
17properties:
18  compatible:
19    const: starfive,jh7110-dphy-rx
20
21  reg:
22    maxItems: 1
23
24  clocks:
25    items:
26      - description: config clock
27      - description: reference clock
28      - description: escape mode transmit clock
29
30  clock-names:
31    items:
32      - const: cfg
33      - const: ref
34      - const: tx
35
36  resets:
37    items:
38      - description: DPHY_HW reset
39      - description: DPHY_B09_ALWAYS_ON reset
40
41  power-domains:
42    maxItems: 1
43
44  "#phy-cells":
45    const: 0
46
47required:
48  - compatible
49  - reg
50  - clocks
51  - clock-names
52  - resets
53  - power-domains
54  - "#phy-cells"
55
56additionalProperties: false
57
58examples:
59  - |
60    phy@19820000 {
61      compatible = "starfive,jh7110-dphy-rx";
62      reg = <0x19820000 0x10000>;
63      clocks = <&ispcrg 3>,
64               <&ispcrg 4>,
65               <&ispcrg 5>;
66      clock-names = "cfg", "ref", "tx";
67      resets = <&ispcrg 2>,
68               <&ispcrg 3>;
69      power-domains = <&aon_syscon 1>;
70      #phy-cells = <0>;
71    };
72