1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/phy/socionext,uniphier-pcie-phy.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Socionext UniPhier PCIe PHY 8 9description: | 10 This describes the devicetree bindings for PHY interface built into 11 PCIe controller implemented on Socionext UniPhier SoCs. 12 13maintainers: 14 - Kunihiko Hayashi <hayashi.kunihiko@socionext.com> 15 16properties: 17 compatible: 18 enum: 19 - socionext,uniphier-pro5-pcie-phy 20 - socionext,uniphier-ld20-pcie-phy 21 - socionext,uniphier-pxs3-pcie-phy 22 - socionext,uniphier-nx1-pcie-phy 23 24 reg: 25 maxItems: 1 26 27 "#phy-cells": 28 const: 0 29 30 clocks: 31 minItems: 1 32 maxItems: 2 33 34 clock-names: 35 minItems: 1 36 maxItems: 2 37 38 resets: 39 minItems: 1 40 maxItems: 2 41 42 reset-names: 43 minItems: 1 44 maxItems: 2 45 46 socionext,syscon: 47 $ref: /schemas/types.yaml#/definitions/phandle 48 description: A phandle to system control to set configurations for phy 49 50allOf: 51 - if: 52 properties: 53 compatible: 54 contains: 55 const: socionext,uniphier-pro5-pcie-phy 56 then: 57 properties: 58 clocks: 59 minItems: 2 60 maxItems: 2 61 clock-names: 62 items: 63 - const: gio 64 - const: link 65 resets: 66 minItems: 2 67 maxItems: 2 68 reset-names: 69 items: 70 - const: gio 71 - const: link 72 else: 73 properties: 74 clocks: 75 maxItems: 1 76 clock-names: 77 const: link 78 resets: 79 maxItems: 1 80 reset-names: 81 const: link 82 83required: 84 - compatible 85 - reg 86 - "#phy-cells" 87 - clocks 88 - clock-names 89 - resets 90 - reset-names 91 92additionalProperties: false 93 94examples: 95 - | 96 pcie_phy: phy@66038000 { 97 compatible = "socionext,uniphier-ld20-pcie-phy"; 98 reg = <0x66038000 0x4000>; 99 #phy-cells = <0>; 100 clock-names = "link"; 101 clocks = <&sys_clk 24>; 102 reset-names = "link"; 103 resets = <&sys_rst 24>; 104 socionext,syscon = <&soc_glue>; 105 }; 106