1* Marvell MVEBU SATA PHY 2 3Power control for the SATA phy found on Marvell MVEBU SoCs. 4 5This document extends the binding described in phy-bindings.txt 6 7Required properties : 8 9 - reg : Offset and length of the register set for the SATA device 10 - compatible : Should be "marvell,mvebu-sata-phy" 11 - clocks : phandle of clock and specifier that supplies the device 12 - clock-names : Should be "sata" 13 14Example: 15 sata-phy@84000 { 16 compatible = "marvell,mvebu-sata-phy"; 17 reg = <0x84000 0x0334>; 18 clocks = <&gate_clk 15>; 19 clock-names = "sata"; 20 #phy-cells = <0>; 21 status = "ok"; 22 }; 23 24Armada 375 USB cluster 25---------------------- 26 27Armada 375 comes with an USB2 host and device controller and an USB3 28controller. The USB cluster control register allows to manage common 29features of both USB controllers. 30 31Required properties: 32 33- compatible: "marvell,armada-375-usb-cluster" 34- reg: Should contain usb cluster register location and length. 35- #phy-cells : from the generic phy bindings, must be 1. Possible 36values are 1 (USB2), 2 (USB3). 37 38Example: 39 usbcluster: usb-cluster@18400 { 40 compatible = "marvell,armada-375-usb-cluster"; 41 reg = <0x18400 0x4>; 42 #phy-cells = <1> 43 }; 44