xref: /linux/Documentation/devicetree/bindings/phy/hisilicon,hi3798cv200-combphy.yaml (revision 3a39d672e7f48b8d6b91a09afa4b55352773b4b5)

# SPDX-License-Identifier: GPL-2.0
%YAML 1.2
---
$id: http://devicetree.org/schemas/phy/hisilicon,hi3798cv200-combphy.yaml#
$schema: http://devicetree.org/meta-schemas/core.yaml#

title: HiSilicon STB PCIE/SATA/USB3 PHY

maintainers:
  - Shawn Guo <shawn.guo@linaro.org>

properties:
  compatible:
    const: hisilicon,hi3798cv200-combphy

  reg:
    maxItems: 1

  '#phy-cells':
    description: The cell contains the PHY mode
    const: 1

  clocks:
    maxItems: 1

  resets:
    maxItems: 1

  hisilicon,fixed-mode:
    description: If the phy device doesn't support mode select but a fixed mode
      setting, the property should be present to specify the particular mode.
    $ref: /schemas/types.yaml#/definitions/uint32
    enum: [ 1, 2, 4]  # SATA, PCIE, USB3

  hisilicon,mode-select-bits:
    description: If the phy device support mode select, this property should be
      present to specify the register bits in peripheral controller.
    items:
      - description: register_offset
      - description: bit shift
      - description: bit mask

required:
  - compatible
  - reg
  - '#phy-cells'
  - clocks
  - resets

oneOf:
  - required: ['hisilicon,fixed-mode']
  - required: ['hisilicon,mode-select-bits']

additionalProperties: false

...