xref: /linux/Documentation/devicetree/bindings/phy/fsl,mxs-usbphy.yaml (revision 7afb9d76bc513cb8a2409092dbd3610524a198fe) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/fsl,mxs-usbphy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Freescale MXS USB Phy Device
8
9maintainers:
10  - Xu Yang <xu.yang_2@nxp.com>
11
12properties:
13  compatible:
14    oneOf:
15      - enum:
16          - fsl,imx23-usbphy
17          - fsl,imx7ulp-usbphy
18          - fsl,vf610-usbphy
19      - items:
20          - enum:
21              - fsl,imx28-usbphy
22              - fsl,imx6ul-usbphy
23              - fsl,imx6sl-usbphy
24              - fsl,imx6sx-usbphy
25              - fsl,imx6q-usbphy
26          - const: fsl,imx23-usbphy
27      - items:
28          - const: fsl,imx6sll-usbphy
29          - const: fsl,imx6ul-usbphy
30          - const: fsl,imx23-usbphy
31      - items:
32          - enum:
33              - fsl,imx8dxl-usbphy
34              - fsl,imx8qm-usbphy
35              - fsl,imx8ulp-usbphy
36          - const: fsl,imx7ulp-usbphy
37
38  reg:
39    maxItems: 1
40
41  interrupts:
42    maxItems: 1
43
44  clocks:
45    maxItems: 1
46
47  '#phy-cells':
48    const: 0
49
50  power-domains:
51    maxItems: 1
52
53  fsl,anatop:
54    description:
55      phandle for anatop register, it is only for imx6 SoC series.
56    $ref: /schemas/types.yaml#/definitions/phandle
57
58  phy-3p0-supply:
59    description:
60      One of USB PHY's power supply. Can be used to keep a good signal
61      quality.
62
63  fsl,tx-cal-45-dn-ohms:
64    description:
65      Resistance (in ohms) of switchable high-speed trimming resistor
66      connected in parallel with the 45 ohm resistor that terminates
67      the DN output signal.
68    minimum: 35
69    maximum: 54
70    default: 45
71
72  fsl,tx-cal-45-dp-ohms:
73    description:
74      Resistance (in ohms) of switchable high-speed trimming resistor
75      connected in parallel with the 45 ohm resistor that terminates
76      the DP output signal.
77    minimum: 35
78    maximum: 54
79    default: 45
80
81  fsl,tx-d-cal:
82    description:
83      Current trimming value (as a percentage) of the 17.78 mA TX
84      reference current.
85    $ref: /schemas/types.yaml#/definitions/uint32
86    minimum: 79
87    maximum: 119
88    default: 100
89
90required:
91  - compatible
92  - reg
93  - clocks
94
95allOf:
96  - if:
97      properties:
98        compatible:
99          oneOf:
100            - enum:
101                - fsl,imx6q-usbphy
102                - fsl,imx6sl-usbphy
103                - fsl,imx6sx-usbphy
104                - fsl,imx6sll-usbphy
105                - fsl,vf610-usbphy
106            - items:
107                - const: fsl,imx6ul-usbphy
108                - const: fsl,imx23-usbphy
109    then:
110      required:
111        - fsl,anatop
112
113additionalProperties: false
114
115examples:
116  - |
117    #include <dt-bindings/interrupt-controller/arm-gic.h>
118    #include <dt-bindings/clock/imx6qdl-clock.h>
119
120    usbphy1: usb-phy@20c9000 {
121        compatible = "fsl,imx6q-usbphy", "fsl,imx23-usbphy";
122        reg = <0x020c9000 0x1000>;
123        clocks = <&clks IMX6QDL_CLK_USBPHY1>;
124        interrupts = <GIC_SPI 44 IRQ_TYPE_LEVEL_HIGH>;
125        fsl,anatop = <&anatop>;
126    };
127
128...
129