xref: /linux/Documentation/devicetree/bindings/phy/brcm,sata-phy.yaml (revision be239684b18e1cdcafcf8c7face4a2f562c745ad) 
1# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/phy/brcm,sata-phy.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Broadcom SATA3 PHY
8
9maintainers:
10  - Florian Fainelli <f.fainelli@gmail.com>
11
12properties:
13  $nodename:
14    pattern: "^sata[-|_]phy(@.*)?$"
15
16  compatible:
17    oneOf:
18      - items:
19          - enum:
20              - brcm,bcm7216-sata-phy
21              - brcm,bcm7425-sata-phy
22              - brcm,bcm7445-sata-phy
23              - brcm,bcm63138-sata-phy
24          - const: brcm,phy-sata3
25      - items:
26          - const: brcm,iproc-nsp-sata-phy
27      - items:
28          - const: brcm,iproc-ns2-sata-phy
29      - items:
30          - const: brcm,iproc-sr-sata-phy
31
32  reg:
33    minItems: 1
34    maxItems: 2
35
36  reg-names:
37    minItems: 1
38    items:
39      - const: phy
40      - const: phy-ctrl
41
42  "#address-cells":
43    const: 1
44
45  "#size-cells":
46    const: 0
47
48patternProperties:
49  "^sata-phy@[0-9]+$":
50    type: object
51    description: |
52      Each port's PHY should be represented as a sub-node.
53
54    properties:
55      reg:
56        description: The SATA PHY port number
57        maxItems: 1
58
59      "#phy-cells":
60        const: 0
61
62      "brcm,enable-ssc":
63        $ref: /schemas/types.yaml#/definitions/flag
64        description: |
65          Use spread spectrum clocking (SSC) on this port
66          This property is not applicable for "brcm,iproc-ns2-sata-phy",
67          "brcm,iproc-nsp-sata-phy" and "brcm,iproc-sr-sata-phy".
68
69      "brcm,rxaeq-mode":
70        $ref: /schemas/types.yaml#/definitions/string
71        description:
72          String that indicates the desired RX equalizer mode.
73        enum:
74          - off
75          - auto
76          - manual
77
78      "brcm,rxaeq-value":
79        $ref: /schemas/types.yaml#/definitions/uint32
80        description: |
81            When 'brcm,rxaeq-mode' is set to "manual", provides the RX
82            equalizer value that should be used.
83        minimum: 0
84        maximum: 63
85
86      "brcm,tx-amplitude-millivolt":
87        description: |
88            Transmit amplitude voltage in millivolt.
89        $ref: /schemas/types.yaml#/definitions/uint32
90        enum: [400, 500, 600, 800]
91
92    required:
93      - reg
94      - "#phy-cells"
95
96    additionalProperties: false
97
98if:
99  properties:
100    compatible:
101      const: brcm,iproc-ns2-sata-phy
102then:
103  properties:
104    reg:
105      minItems: 2
106
107    reg-names:
108      minItems: 2
109else:
110  properties:
111    reg:
112      maxItems: 1
113
114    reg-names:
115      maxItems: 1
116
117required:
118  - compatible
119  - "#address-cells"
120  - "#size-cells"
121  - reg
122  - reg-names
123
124additionalProperties: false
125
126examples:
127  - |
128    sata_phy@f0458100 {
129        compatible = "brcm,bcm7445-sata-phy", "brcm,phy-sata3";
130        reg = <0xf0458100 0x1e00>;
131        reg-names = "phy";
132        #address-cells = <1>;
133        #size-cells = <0>;
134
135        sata-phy@0 {
136                reg = <0>;
137                #phy-cells = <0>;
138        };
139
140        sata-phy@1 {
141                reg = <1>;
142                #phy-cells = <0>;
143        };
144    };
145