xref: /linux/Documentation/devicetree/bindings/pci/ti,am65-pci-host.yaml (revision 24168c5e6dfbdd5b414f048f47f75d64533296ca) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2# Copyright (C) 2021 Texas Instruments Incorporated - http://www.ti.com/
3%YAML 1.2
4---
5$id: http://devicetree.org/schemas/pci/ti,am65-pci-host.yaml#
6$schema: http://devicetree.org/meta-schemas/core.yaml#
7
8title: TI AM65 PCI Host
9
10maintainers:
11  - Kishon Vijay Abraham I <kishon@ti.com>
12
13allOf:
14  - $ref: /schemas/pci/pci-host-bridge.yaml#
15
16properties:
17  compatible:
18    enum:
19      - ti,am654-pcie-rc
20      - ti,keystone-pcie
21
22  reg:
23    maxItems: 4
24
25  reg-names:
26    items:
27      - const: app
28      - const: dbics
29      - const: config
30      - const: atu
31
32  interrupts:
33    maxItems: 1
34
35  power-domains:
36    maxItems: 1
37
38  ti,syscon-pcie-id:
39    $ref: /schemas/types.yaml#/definitions/phandle-array
40    items:
41      - items:
42          - description: Phandle to the SYSCON entry
43          - description: pcie_device_id register offset within SYSCON
44    description: Phandle to the SYSCON entry required for getting PCIe device/vendor ID
45
46  ti,syscon-pcie-mode:
47    $ref: /schemas/types.yaml#/definitions/phandle-array
48    items:
49      - items:
50          - description: Phandle to the SYSCON entry
51          - description: pcie_ctrl register offset within SYSCON
52    description: Phandle to the SYSCON entry required for configuring PCIe in RC or EP mode.
53
54  msi-map: true
55
56  dma-coherent: true
57
58  num-viewport:
59    $ref: /schemas/types.yaml#/definitions/uint32
60
61  phys:
62    description: per-lane PHYs
63    minItems: 1
64    maxItems: 2
65
66  phy-names:
67    minItems: 1
68    maxItems: 2
69    items:
70      pattern: '^pcie-phy[0-1]$'
71
72required:
73  - compatible
74  - reg
75  - reg-names
76  - max-link-speed
77  - ti,syscon-pcie-id
78  - ti,syscon-pcie-mode
79  - ranges
80
81if:
82  properties:
83    compatible:
84      enum:
85        - ti,am654-pcie-rc
86then:
87  required:
88    - dma-coherent
89    - power-domains
90    - msi-map
91    - num-viewport
92
93unevaluatedProperties: false
94
95examples:
96  - |
97    #include <dt-bindings/interrupt-controller/arm-gic.h>
98    #include <dt-bindings/interrupt-controller/irq.h>
99    #include <dt-bindings/phy/phy.h>
100    #include <dt-bindings/soc/ti,sci_pm_domain.h>
101
102    pcie0_rc: pcie@5500000 {
103        compatible = "ti,am654-pcie-rc";
104        reg =  <0x5500000 0x1000>,
105               <0x5501000 0x1000>,
106               <0x10000000 0x2000>,
107               <0x5506000 0x1000>;
108        reg-names = "app", "dbics", "config", "atu";
109        power-domains = <&k3_pds 120 TI_SCI_PD_EXCLUSIVE>;
110        #address-cells = <3>;
111        #size-cells = <2>;
112        ranges = <0x81000000 0 0          0x10020000 0 0x00010000>,
113                 <0x82000000 0 0x10030000 0x10030000 0 0x07FD0000>;
114        ti,syscon-pcie-id = <&scm_conf 0x0210>;
115        ti,syscon-pcie-mode = <&scm_conf 0x4060>;
116        bus-range = <0x0 0xff>;
117        num-viewport = <16>;
118        max-link-speed = <2>;
119        dma-coherent;
120        interrupts = <GIC_SPI 340 IRQ_TYPE_EDGE_RISING>;
121        msi-map = <0x0 &gic_its 0x0 0x10000>;
122        device_type = "pci";
123        num-lanes = <1>;
124        phys = <&serdes0 PHY_TYPE_PCIE 0>;
125        phy-names = "pcie-phy0";
126    };
127