xref: /linux/Documentation/devicetree/bindings/pci/qcom,pcie-sm8450.yaml (revision 55d0969c451159cff86949b38c39171cab962069)
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/qcom,pcie-sm8450.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SM8450 PCI Express Root Complex
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
12
13description:
14  Qualcomm SM8450 SoC PCIe root complex controller is based on the Synopsys
15  DesignWare PCIe IP.
16
17properties:
18  compatible:
19    enum:
20      - qcom,pcie-sm8450-pcie0
21      - qcom,pcie-sm8450-pcie1
22
23  reg:
24    minItems: 5
25    maxItems: 6
26
27  reg-names:
28    minItems: 5
29    items:
30      - const: parf # Qualcomm specific registers
31      - const: dbi # DesignWare PCIe registers
32      - const: elbi # External local bus interface registers
33      - const: atu # ATU address space
34      - const: config # PCIe configuration space
35      - const: mhi # MHI registers
36
37  clocks:
38    minItems: 11
39    maxItems: 12
40
41  clock-names:
42    minItems: 11
43    items:
44      - const: pipe # PIPE clock
45      - const: pipe_mux # PIPE MUX
46      - const: phy_pipe # PIPE output clock
47      - const: ref # REFERENCE clock
48      - const: aux # Auxiliary clock
49      - const: cfg # Configuration clock
50      - const: bus_master # Master AXI clock
51      - const: bus_slave # Slave AXI clock
52      - const: slave_q2a # Slave Q2A clock
53      - const: ddrss_sf_tbu # PCIe SF TBU clock
54      - enum: [aggre0, aggre1] # Aggre NoC PCIe0/1 AXI clock
55      - const: aggre1 # Aggre NoC PCIe1 AXI clock
56
57  interrupts:
58    minItems: 9
59    maxItems: 9
60
61  interrupt-names:
62    items:
63      - const: msi0
64      - const: msi1
65      - const: msi2
66      - const: msi3
67      - const: msi4
68      - const: msi5
69      - const: msi6
70      - const: msi7
71      - const: global
72
73  operating-points-v2: true
74  opp-table:
75    type: object
76
77  resets:
78    maxItems: 1
79
80  reset-names:
81    items:
82      - const: pci
83
84allOf:
85  - $ref: qcom,pcie-common.yaml#
86
87unevaluatedProperties: false
88
89examples:
90  - |
91    #include <dt-bindings/clock/qcom,gcc-sm8450.h>
92    #include <dt-bindings/clock/qcom,rpmh.h>
93    #include <dt-bindings/gpio/gpio.h>
94    #include <dt-bindings/interconnect/qcom,sm8450.h>
95    #include <dt-bindings/interrupt-controller/arm-gic.h>
96
97    soc {
98        #address-cells = <2>;
99        #size-cells = <2>;
100
101        pcie@1c00000 {
102            compatible = "qcom,pcie-sm8450-pcie0";
103            reg = <0 0x01c00000 0 0x3000>,
104                  <0 0x60000000 0 0xf1d>,
105                  <0 0x60000f20 0 0xa8>,
106                  <0 0x60001000 0 0x1000>,
107                  <0 0x60100000 0 0x100000>;
108            reg-names = "parf", "dbi", "elbi", "atu", "config";
109            ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
110                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
111
112            bus-range = <0x00 0xff>;
113            device_type = "pci";
114            linux,pci-domain = <0>;
115            max-link-speed = <2>;
116            num-lanes = <1>;
117
118            #address-cells = <3>;
119            #size-cells = <2>;
120
121            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
122                     <&gcc GCC_PCIE_0_PIPE_CLK_SRC>,
123                     <&pcie0_phy>,
124                     <&rpmhcc RPMH_CXO_CLK>,
125                     <&gcc GCC_PCIE_0_AUX_CLK>,
126                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
127                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
128                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
129                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
130                     <&gcc GCC_DDRSS_PCIE_SF_TBU_CLK>,
131                     <&gcc GCC_AGGRE_NOC_PCIE_0_AXI_CLK>,
132                     <&gcc GCC_AGGRE_NOC_PCIE_1_AXI_CLK>;
133            clock-names = "pipe",
134                          "pipe_mux",
135                          "phy_pipe",
136                          "ref",
137                          "aux",
138                          "cfg",
139                          "bus_master",
140                          "bus_slave",
141                          "slave_q2a",
142                          "ddrss_sf_tbu",
143                          "aggre0",
144                          "aggre1";
145
146            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
147                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
148                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
149                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
150                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
151                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
152                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
153                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>,
154                         <GIC_SPI 140 IRQ_TYPE_LEVEL_HIGH>;
155            interrupt-names = "msi0", "msi1", "msi2", "msi3",
156                              "msi4", "msi5", "msi6", "msi7", "global";
157            #interrupt-cells = <1>;
158            interrupt-map-mask = <0 0 0 0x7>;
159            interrupt-map = <0 0 0 1 &intc 0 0 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
160                            <0 0 0 2 &intc 0 0 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
161                            <0 0 0 3 &intc 0 0 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
162                            <0 0 0 4 &intc 0 0 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
163            msi-map = <0x0 &gic_its 0x5981 0x1>,
164                      <0x100 &gic_its 0x5980 0x1>;
165            msi-map-mask = <0xff00>;
166
167            iommu-map = <0x0 &apps_smmu 0x1c00 0x1>,
168                        <0x100 &apps_smmu 0x1c01 0x1>;
169
170            phys = <&pcie0_phy>;
171            phy-names = "pciephy";
172
173            pinctrl-0 = <&pcie0_default_state>;
174            pinctrl-names = "default";
175
176            power-domains = <&gcc PCIE_0_GDSC>;
177
178            resets = <&gcc GCC_PCIE_0_BCR>;
179            reset-names = "pci";
180
181            perst-gpios = <&tlmm 94 GPIO_ACTIVE_LOW>;
182            wake-gpios = <&tlmm 96 GPIO_ACTIVE_HIGH>;
183        };
184    };
185