xref: /linux/Documentation/devicetree/bindings/pci/qcom,pcie-sc8180x.yaml (revision c532de5a67a70f8533d495f8f2aaa9a0491c3ad0) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/qcom,pcie-sc8180x.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SC8180x PCI Express Root Complex
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
12
13description:
14  Qualcomm SC8180x SoC PCIe root complex controller is based on the Synopsys
15  DesignWare PCIe IP.
16
17properties:
18  compatible:
19    const: qcom,pcie-sc8180x
20
21  reg:
22    minItems: 5
23    maxItems: 6
24
25  reg-names:
26    minItems: 5
27    items:
28      - const: parf # Qualcomm specific registers
29      - const: dbi # DesignWare PCIe registers
30      - const: elbi # External local bus interface registers
31      - const: atu # ATU address space
32      - const: config # PCIe configuration space
33      - const: mhi # MHI registers
34
35  clocks:
36    minItems: 8
37    maxItems: 8
38
39  clock-names:
40    items:
41      - const: pipe # PIPE clock
42      - const: aux # Auxiliary clock
43      - const: cfg # Configuration clock
44      - const: bus_master # Master AXI clock
45      - const: bus_slave # Slave AXI clock
46      - const: slave_q2a # Slave Q2A clock
47      - const: ref # REFERENCE clock
48      - const: tbu # PCIe TBU clock
49
50  interrupts:
51    minItems: 8
52    maxItems: 8
53
54  interrupt-names:
55    items:
56      - const: msi0
57      - const: msi1
58      - const: msi2
59      - const: msi3
60      - const: msi4
61      - const: msi5
62      - const: msi6
63      - const: msi7
64
65  resets:
66    maxItems: 1
67
68  reset-names:
69    items:
70      - const: pci
71
72allOf:
73  - $ref: qcom,pcie-common.yaml#
74
75unevaluatedProperties: false
76
77examples:
78  - |
79    #include <dt-bindings/clock/qcom,gcc-sc8180x.h>
80    #include <dt-bindings/interconnect/qcom,sc8180x.h>
81    #include <dt-bindings/interrupt-controller/arm-gic.h>
82
83    soc {
84        #address-cells = <2>;
85        #size-cells = <2>;
86
87        pcie@1c00000 {
88            compatible = "qcom,pcie-sc8180x";
89            reg = <0 0x01c00000 0 0x3000>,
90                  <0 0x60000000 0 0xf1d>,
91                  <0 0x60000f20 0 0xa8>,
92                  <0 0x60001000 0 0x1000>,
93                  <0 0x60100000 0 0x100000>;
94            reg-names = "parf",
95                        "dbi",
96                        "elbi",
97                        "atu",
98                        "config";
99            ranges = <0x01000000 0x0 0x60200000 0x0 0x60200000 0x0 0x100000>,
100                     <0x02000000 0x0 0x60300000 0x0 0x60300000 0x0 0x3d00000>;
101
102            bus-range = <0x00 0xff>;
103            device_type = "pci";
104            linux,pci-domain = <0>;
105            num-lanes = <2>;
106
107            #address-cells = <3>;
108            #size-cells = <2>;
109
110            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
111            assigned-clock-rates = <19200000>;
112
113            clocks = <&gcc GCC_PCIE_0_PIPE_CLK>,
114                     <&gcc GCC_PCIE_0_AUX_CLK>,
115                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
116                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
117                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
118                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>,
119                     <&gcc GCC_PCIE_0_CLKREF_CLK>,
120                     <&gcc GCC_AGGRE_NOC_PCIE_TBU_CLK>;
121            clock-names = "pipe",
122                          "aux",
123                          "cfg",
124                          "bus_master",
125                          "bus_slave",
126                          "slave_q2a",
127                          "ref",
128                          "tbu";
129
130            dma-coherent;
131
132            interrupts = <GIC_SPI 141 IRQ_TYPE_LEVEL_HIGH>,
133                         <GIC_SPI 142 IRQ_TYPE_LEVEL_HIGH>,
134                         <GIC_SPI 143 IRQ_TYPE_LEVEL_HIGH>,
135                         <GIC_SPI 144 IRQ_TYPE_LEVEL_HIGH>,
136                         <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>,
137                         <GIC_SPI 146 IRQ_TYPE_LEVEL_HIGH>,
138                         <GIC_SPI 147 IRQ_TYPE_LEVEL_HIGH>,
139                         <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
140            interrupt-names = "msi0",
141                          "msi1",
142                          "msi2",
143                          "msi3",
144                          "msi4",
145                          "msi5",
146                          "msi6",
147                          "msi7";
148            #interrupt-cells = <1>;
149            interrupt-map-mask = <0 0 0 0x7>;
150            interrupt-map = <0 0 0 1 &intc 0 149 IRQ_TYPE_LEVEL_HIGH>, /* int_a */
151                            <0 0 0 2 &intc 0 150 IRQ_TYPE_LEVEL_HIGH>, /* int_b */
152                            <0 0 0 3 &intc 0 151 IRQ_TYPE_LEVEL_HIGH>, /* int_c */
153                            <0 0 0 4 &intc 0 152 IRQ_TYPE_LEVEL_HIGH>; /* int_d */
154
155            interconnects = <&aggre2_noc MASTER_PCIE 0 &mc_virt SLAVE_EBI_CH0 0>,
156                            <&gem_noc MASTER_AMPSS_M0 0 &config_noc SLAVE_PCIE_0 0>;
157            interconnect-names = "pcie-mem", "cpu-pcie";
158
159            iommu-map = <0x0 &apps_smmu 0x1d80 0x1>,
160                        <0x100 &apps_smmu 0x1d81 0x1>;
161
162            phys = <&pcie0_phy>;
163            phy-names = "pciephy";
164
165            power-domains = <&gcc PCIE_0_GDSC>;
166
167            resets = <&gcc GCC_PCIE_0_BCR>;
168            reset-names = "pci";
169        };
170    };
171