xref: /linux/Documentation/devicetree/bindings/pci/qcom,pcie-sa8775p.yaml (revision 71dfa617ea9f18e4585fe78364217cd32b1fc382) 
1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
2%YAML 1.2
3---
4$id: http://devicetree.org/schemas/pci/qcom,pcie-sa8775p.yaml#
5$schema: http://devicetree.org/meta-schemas/core.yaml#
6
7title: Qualcomm SA8775p PCI Express Root Complex
8
9maintainers:
10  - Bjorn Andersson <andersson@kernel.org>
11  - Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
12
13description:
14  Qualcomm SA8775p SoC PCIe root complex controller is based on the Synopsys
15  DesignWare PCIe IP.
16
17properties:
18  compatible:
19    const: qcom,pcie-sa8775p
20
21  reg:
22    minItems: 6
23    maxItems: 6
24
25  reg-names:
26    items:
27      - const: parf # Qualcomm specific registers
28      - const: dbi # DesignWare PCIe registers
29      - const: elbi # External local bus interface registers
30      - const: atu # ATU address space
31      - const: config # PCIe configuration space
32      - const: mhi # MHI registers
33
34  clocks:
35    minItems: 5
36    maxItems: 5
37
38  clock-names:
39    items:
40      - const: aux # Auxiliary clock
41      - const: cfg # Configuration clock
42      - const: bus_master # Master AXI clock
43      - const: bus_slave # Slave AXI clock
44      - const: slave_q2a # Slave Q2A clock
45
46  interrupts:
47    minItems: 8
48    maxItems: 8
49
50  interrupt-names:
51    items:
52      - const: msi0
53      - const: msi1
54      - const: msi2
55      - const: msi3
56      - const: msi4
57      - const: msi5
58      - const: msi6
59      - const: msi7
60
61  resets:
62    maxItems: 1
63
64  reset-names:
65    items:
66      - const: pci
67
68required:
69  - interconnects
70  - interconnect-names
71
72allOf:
73  - $ref: qcom,pcie-common.yaml#
74
75unevaluatedProperties: false
76
77examples:
78  - |
79    #include <dt-bindings/clock/qcom,sa8775p-gcc.h>
80    #include <dt-bindings/clock/qcom,rpmh.h>
81    #include <dt-bindings/gpio/gpio.h>
82    #include <dt-bindings/interrupt-controller/arm-gic.h>
83    #include <dt-bindings/interconnect/qcom,sa8775p-rpmh.h>
84
85    soc {
86        #address-cells = <2>;
87        #size-cells = <2>;
88
89        pcie@1c00000 {
90            compatible = "qcom,pcie-sa8775p";
91            reg = <0x0 0x01c00000 0x0 0x3000>,
92                  <0x0 0x40000000 0x0 0xf20>,
93                  <0x0 0x40000f20 0x0 0xa8>,
94                  <0x0 0x40001000 0x0 0x4000>,
95                  <0x0 0x40100000 0x0 0x100000>,
96                  <0x0 0x01c03000 0x0 0x1000>;
97            reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
98            ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
99                     <0x02000000 0x0 0x40300000 0x0 0x40300000 0x0 0x1fd00000>;
100
101            bus-range = <0x00 0xff>;
102            device_type = "pci";
103            linux,pci-domain = <0>;
104            num-lanes = <2>;
105
106            #address-cells = <3>;
107            #size-cells = <2>;
108
109            assigned-clocks = <&gcc GCC_PCIE_0_AUX_CLK>;
110            assigned-clock-rates = <19200000>;
111
112            clocks = <&gcc GCC_PCIE_0_AUX_CLK>,
113                     <&gcc GCC_PCIE_0_CFG_AHB_CLK>,
114                     <&gcc GCC_PCIE_0_MSTR_AXI_CLK>,
115                     <&gcc GCC_PCIE_0_SLV_AXI_CLK>,
116                     <&gcc GCC_PCIE_0_SLV_Q2A_AXI_CLK>;
117            clock-names = "aux",
118                          "cfg",
119                          "bus_master",
120                          "bus_slave",
121                          "slave_q2a";
122
123            dma-coherent;
124
125            interrupts = <GIC_SPI 307 IRQ_TYPE_LEVEL_HIGH>,
126                         <GIC_SPI 308 IRQ_TYPE_LEVEL_HIGH>,
127                         <GIC_SPI 309 IRQ_TYPE_LEVEL_HIGH>,
128                         <GIC_SPI 312 IRQ_TYPE_LEVEL_HIGH>,
129                         <GIC_SPI 313 IRQ_TYPE_LEVEL_HIGH>,
130                         <GIC_SPI 314 IRQ_TYPE_LEVEL_HIGH>,
131                         <GIC_SPI 374 IRQ_TYPE_LEVEL_HIGH>,
132                         <GIC_SPI 375 IRQ_TYPE_LEVEL_HIGH>;
133            interrupt-names = "msi0",
134                              "msi1",
135                              "msi2",
136                              "msi3",
137                              "msi4",
138                              "msi5",
139                              "msi6",
140                              "msi7";
141            #interrupt-cells = <1>;
142            interrupt-map-mask = <0 0 0 0x7>;
143            interrupt-map = <0 0 0 1 &intc GIC_SPI 434 IRQ_TYPE_LEVEL_HIGH>,
144                            <0 0 0 2 &intc GIC_SPI 435 IRQ_TYPE_LEVEL_HIGH>,
145                            <0 0 0 3 &intc GIC_SPI 438 IRQ_TYPE_LEVEL_HIGH>,
146                            <0 0 0 4 &intc GIC_SPI 439 IRQ_TYPE_LEVEL_HIGH>;
147
148            interconnects = <&pcie_anoc MASTER_PCIE_0 0 &mc_virt SLAVE_EBI1 0>,
149                            <&gem_noc MASTER_APPSS_PROC 0 &config_noc SLAVE_PCIE_0 0>;
150            interconnect-names = "pcie-mem", "cpu-pcie";
151
152            iommu-map = <0x0 &pcie_smmu 0x0000 0x1>,
153                        <0x100 &pcie_smmu 0x0001 0x1>;
154
155            phys = <&pcie0_phy>;
156            phy-names = "pciephy";
157
158            power-domains = <&gcc PCIE_0_GDSC>;
159
160            resets = <&gcc GCC_PCIE_0_BCR>;
161            reset-names = "pci";
162
163            perst-gpios = <&tlmm 2 GPIO_ACTIVE_LOW>;
164            wake-gpios = <&tlmm 0 GPIO_ACTIVE_HIGH>;
165        };
166    };
167