1# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) 2%YAML 1.2 3--- 4$id: http://devicetree.org/schemas/pci/fsl,layerscape-pcie-ep.yaml# 5$schema: http://devicetree.org/meta-schemas/core.yaml# 6 7title: Freescale Layerscape PCIe Endpoint(EP) controller 8 9maintainers: 10 - Frank Li <Frank.Li@nxp.com> 11 12description: 13 This PCIe EP controller is based on the Synopsys DesignWare PCIe IP. 14 15 This controller derives its clocks from the Reset Configuration Word (RCW) 16 which is used to describe the PLL settings at the time of chip-reset. 17 18 Also as per the available Reference Manuals, there is no specific 'version' 19 register available in the Freescale PCIe controller register set, 20 which can allow determining the underlying DesignWare PCIe controller version 21 information. 22 23properties: 24 compatible: 25 enum: 26 - fsl,ls2088a-pcie-ep 27 - fsl,ls1088a-pcie-ep 28 - fsl,ls1046a-pcie-ep 29 - fsl,ls1028a-pcie-ep 30 - fsl,lx2160ar2-pcie-ep 31 32 reg: 33 maxItems: 2 34 35 reg-names: 36 items: 37 - const: regs 38 - const: addr_space 39 40 fsl,pcie-scfg: 41 $ref: /schemas/types.yaml#/definitions/phandle 42 description: A phandle to the SCFG device node. The second entry is the 43 physical PCIe controller index starting from '0'. This is used to get 44 SCFG PEXN registers. 45 46 big-endian: 47 $ref: /schemas/types.yaml#/definitions/flag 48 description: If the PEX_LUT and PF register block is in big-endian, specify 49 this property. 50 51 dma-coherent: true 52 53 interrupts: 54 minItems: 1 55 maxItems: 2 56 57 interrupt-names: 58 minItems: 1 59 maxItems: 2 60 61required: 62 - compatible 63 - reg 64 - reg-names 65 66allOf: 67 - if: 68 properties: 69 compatible: 70 enum: 71 - fsl,ls1028a-pcie-ep 72 - fsl,ls1046a-pcie-ep 73 - fsl,ls1088a-pcie-ep 74 then: 75 properties: 76 interrupt-names: 77 items: 78 - const: pme 79 80unevaluatedProperties: false 81 82examples: 83 - | 84 #include <dt-bindings/interrupt-controller/arm-gic.h> 85 86 soc { 87 #address-cells = <2>; 88 #size-cells = <2>; 89 90 pcie_ep1: pcie-ep@3400000 { 91 compatible = "fsl,ls1028a-pcie-ep"; 92 reg = <0x00 0x03400000 0x0 0x00100000 93 0x80 0x00000000 0x8 0x00000000>; 94 reg-names = "regs", "addr_space"; 95 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>; /* PME interrupt */ 96 interrupt-names = "pme"; 97 num-ib-windows = <6>; 98 num-ob-windows = <8>; 99 status = "disabled"; 100 }; 101 }; 102... 103